Panasonic VT60P Series, VT60M Series, VT60D Series quick start FAQs

Page 21

FAQs

Before requesting service or assistance, please follow these simple guides to solve the problem.

For more information, refer to [eHELP] (Support > FAQs).

The TV does not switch on

Check the mains lead is plugged into the TV and the socket outlet.

The TV goes into Standby mode

Auto power standby function is activated.

The remote control does not work or is intermittent

Are the batteries installed correctly? (p. 12)

Has the TV been switched on?

The batteries may be running low. Replace them with new ones.

Point the remote control directly at the TV’s remote control signal receiver (within about 7 m and a 30 degree angle of the signal receiver).

Situate the TV away from sunshine or other sources of bright light not to shine on the TV’s remote control signal receiver.

Electronic Touch Pen does not work

Check that the batteries are fresh, are of the same type and are installed with the correct polarity (+ & -).

Check if the pairing range is within 50 cm.

The Electronic Touch Pen automatically turns off if pairing cannot be performed within 2 minutes. In this case, pair again.

The Electronic Touch Pen automatically turns off if unused for 5 minutes.

(When the Electronic Touch Pen is turned on, the indicator lamp blinks but turns off in several minutes.) Turn the power on again.

No image can be displayed

Check the TV is turned on.

Check the mains lead is plugged into the TV and the socket outlet.

Check the correct input mode is selected.

Check the setting of [AV] ([COMPONENT] / [VIDEO]) in [Input Selection] to match the output of the external equipment.

Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum?

Check all required cables and connections are firmly in place.

Unusual image is displayed

Turn the TV off with Mains power On / Off switch, then turn it on again.

If the problem persists, initialise all settings. [Shipping Condition] in [System Menu] (Setup Menu)

Unusual sound from the TV

When the power is on, whirring sound of cooling fan or drive noise may be heard from inside the TV (not a sign of faulty operation).

Parts of the TV become hot

Even if the temperature of parts of the front, top and rear panels has risen, these temperature rises do not cause any problems in terms of performance or quality.

21

Image 21
Contents Contents Important Notice Mains plug and lead Safety PrecautionsTake care PedestalBluetooth wireless technology Built-in wireless LANWhen not in use for a long time Radio waveElectronic Touch Pen Use 3D Eyewear UseViewing 3D Images With R03 battery Operating Instructions AccessoriesAssembly screw Bracket Cover M5 × Base Assembling / Removing the pedestalRemoving the pedestal from the TV Assembling the pedestalTerminals ConnectionsBasic connections Mains leadWireless connection Wired connectionDVD Recorder / VCR Set top boxOther connections DVD player Component equipmentCamcorder / Game equipment Video equipment Using the cable tie and cable clamp supplied Remote Control Installing / Removing batteriesIdentifying Controls Touch Pad Viera Touch Pad ControllerHow to hold the Electronic Touch Pen Inserting the batteryPower button Electronic Touch PenUsing the On Screen Displays Operation guide Indicator / Control panelHow to use remote control Operation guidePlug the TV into mains socket and turn power on First time Auto TuningSelect the following items Select the type of Home ScreenSelect TV mode Select a channel Turn power onAccess Apps List and select a feature OperationsDisplay eHELP How to Use eHELPSelect the category and item Help EHELP3D Eyewear Viewing 3D imagesTo view the 3D images 2D images converted to 3DTurn the 3D Eyewear on and put it on MaintenanceView the 3D images Display panel, Cabinet, PedestalFAQs Specifications When using the wall-hanging bracket 3D EyewearElectronic Touch Pen Nigeria Built-in BluetoothIndia Oman Viera Touch Pad Controller