Attaching the pedestal to TV
■Assembling the pedestal
Fix securely with assembly screws A (Total 4 screws).
Tighten screws firmly.
A
Pole
R
LPole
Front
Base
■Set-up
Tighten assembly screws B (total 4 screws) loosely at first, then tighten them firmly to fix securely.
| Rear side |
Arrow | B |
mark |
|
Hole for pedestal installation
PolePole
| Base |
(Image) | Work on a flat surface |
|
Accessories
Assembly screws (4 of each)
A
XYN5+F18FN
size (M5 × 18) (Silver)
B
THEL080N
size (M5 × 30) (Black)
Poles (2)
(L) TBLA3680
(R) TBLA3679
L R
L or R is printed at the bottom of the poles.
Base (1)
TBL5ZX0337
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the
Remove the assembly screws from the TV.
Lift the TV from the pedestal.
Remove the assembly screws from the pole.
Warning
Do not disassemble or modify the pedestal.
Otherwise, the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
Otherwise, the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.
During
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (Above)
Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.
8