Power cord connection
To attach | To remove |
Insert it firmly until the tabs on both sides click into place.
Keep pushing both sides until they snap and pull.
Attaching Ferrite Core
Be sure to attach the provided ferrite core to the HDMI cable/USB cable (not supplied) to reduce interference or electrical noise.
Attach the ferrite core as close as | Close the ferrite core until it clicks. |
possible to connector on the TV side as |
|
shown. |
|
(example: USB connector)
Installing the remote’s batteries
Open
Hook
Close
Note the correct polarity (+ or
Caution
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
•Do not mix old and new batteries.
•Do not mix different battery types (such as alkaline and manganese batteries).
•Do not use rechargeable
Do not burn or break batteries.
9