(Continued)
Menu list
Menu | Item |
Channel surf mode
Language
Clock
ANT/Cable setup
Input labels
| AntiImage retention | Pixel orbiter | |
| 4:3 side bars | ||
|
| Time (minutes) | |
|
| Scrolling bar | |
| VIERA | VIERA Link | |
| Power on link | ||
| Link | Power off link | |
|
| ||
Setup | settings | Energy saving | |
mode | |||
|
| ||
|
| Unselected device | |
|
| energy save | |
|
| Default speakers | |
| ECO/energysaving | No signal for 10 | |
| No activity for 3 | ||
|
| minutes | |
| Advanced setup | hours | |
| Auto power on | ||
|
| ||
|
| Image viewer | |
|
| auto play | |
| First time setup | ||
| About | ||
| Reset to defaults | ||
Adjustments/Configurations (alternatives)
Sets the mode to select the channel with the Channel up/down button.
(All/Favorite/Digital only/Analog only)
•Favorite: Only channels registered as FAVORITE. Selects the screen menu language.
Adjusts the clock. Sets channels.
Selects the terminal and label of the external equipment.
Prevents “Image retention” with Wobbling. (Automatic/Periodic)
•Automatic: Shifts the display image automatically.
•Periodic: Shifts the display image every (1/2/3/4) minutes according to what was set in the “Time (minutes)” menu.
Sets the time for the “Pixel
Changes the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)
•The recommended setting is “Bright” to prevent the panel “Image retention”. Press “OK” to start the horizontal “Scrolling” on the screen.
Controls the equipment connected to HDMI terminals. (Off/On)
•“Power off link”, “Power on link”, “Energy saving mode”, “Unselected device energy save” and “Default speakers” cannot be selected if “Off” is set.
Sets “Power on link” of the HDMI connected equipment. (No/Yes)
Sets “Power off link” of the HDMI connected equipment. (No/Yes)
Sets “Energy saving mode” of the HDMI connected equipment. (Quick start/Save)
Sets “Unselected device energy save” of the HDMI connected equipment.
(No (stay on)/Yes (with prompt)/Yes (no prompt))
Selects the default speakers. (TV/Theater)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION continue for more than 10 minutes. (Stay on/Power TV off)
Note
•Not in use when “Auto power on”, “On/Off Timer” or “Lock” is set, or while “SD mode” or “Digital Channel” is selected.
•“No signal for 10 minutes was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No signal for 10 minutes”.
•The
To conserve energy, the TV automatically turns off when no operation of remote and side panel key continues for more than 3 hours. (Stay on/Power TV off)
Note
•Not in use when “Auto power on” or “On/Off Timer” is set, or while “PC input” is selected.
•“No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No activity for 3 hours”.
•The
Turns TV On automatically when the cable box or connected device is turned On (No/Yes) TV AC cord must be plugged into this device. TV turns on every time the power is restored.
•The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on” is set.
Sets the “Thumbnail” or “Slideshow” to play back SD cards automatically.
(Slideshow/Thumbnail/Set later/Off)
Restarts the first time setup from “Language” setting.
Displays TV version and software license.
Performing Reset will clear all settings made with Setup, such as channel settings.
Sub menu list
Menu
Setup SUB MENU
Item | Adjustments/Configurations (alternatives) |
|
Channel surf mode | Sets the mode to select the channel with the Channel up/down button. |
|
(All/Favorite/Digital only/Analog only) |
| |
|
| |
Set favorite | Sets favorite channels. |
|
Edit CH caption | Changes the station identifier. |
|
Signal meter | Checks the signal strength if interference or freezing occurs on a digital image. | 17 |
|
|