Panasonic SC-PM91D Press CLOCK/TIMER to select the timer function, On time setting

Page 28

Convenient functions

functions

 

Convenient

The play/record timer

 

You can set the timer to come on at a certain time to wake you up (play timer) or to record a radio station or from the external source (record timer).

The play and record timers cannot be used together.

•Switch on the unit and set the clock (➡ Setting the time, page 9).

•For the play timer, prepare the desired music source (tape, CD, radio, or external), and set the volume.

•For the record timer, check the cassette’s erasure prevention tabs (➡ Erasure prevention, page 25) and insert the tape (➡ Cassette tapes, page 24). Tune to the radio station (➡ The radio, page 23) or select the external source (➡ Using an external unit, page 29).

1Press [CLOCK/TIMER] to select the timer function.

Every time you press the button: CLOCK → z PLAY → z REC

Previous display zPLAY: to set the play timer

zREC: to set the record timer

2ON time setting

(Within 6 seconds or so)

Press [u2/REW] or [i1/FF] to set the start time.

Press [CLOCK/TIMER].

3OFF time setting

Press [u2/REW] or [i1/FF] to set the finish time.

Press [CLOCK/TIMER].

The start and finish times are now set.

4Press [zPLAY/REC] to display the timer indicator.

zPLAY: to turn the play timer on

zREC: to turn the record timer on

(The indicator doesn’t appear if the start and finish times or the clock have not been set.)

5Press [^] to turn the unit off.

The unit must be off for the timers to operate.

•Play timer: Play will start in the set condition at the set time with volume increasing gradually to the set level.

•Record timer: The unit comes on 30 seconds before the set time with the volume muted.

RQT7932

To cancel the timer

Press [zPLAY/REC] to clear the timer indicator from the display. (The timer comes on at the set time everyday if the timer is on.)

To change the settings (when the unit is on)

To change the play/record times

Do steps 1, 2, 3 and 5.

To change the source or volume

1.Press [zPLAY/REC] to clear the timer indicator from the display.

2.Make changes to the source or volume.

3.Do steps 4 to 5.

To change the timer

Press [zPLAY/REC] to select the desired timer. Every time you press the button:

z PLAY → z REC (off)

To check the settings

Press [CLOCK/TIMER] while the unit is on to select “zPLAY” or “zREC”.

The settings are shown in the following order:

Play timer: start time → finish time → source → volume

Record timer: start time → finish time → source

To check the settings while the unit is off, press [CLOCK/TIMER] twice.

If you use the unit after the timers are set

After using, check that the correct tape or disc is loaded before turning the unit off.

Note

•If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated.

•If you selected AUX as the source, when the timer comes on, the unit turns on and engages “AUX” as the source. If you want to playback or record from a connected unit, set that unit’s timer to the same time. (See the connected unit’s instruction manual.)

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Table of contents DVD Stereo SystemImportant Safety Instructions Accessories SystemDisc information Disc informationTray/disc handling procedure Opening/closing a disc tray Cleaning discsDisc handling precautions Inserting discs correctlySimple setup Positioning and connecting the speakers ConnectingPositioning Do not attach these speakers to walls or ceilingsSimple setup Television Video OUT terminalComponent Video OUT terminals To enjoy progressive videoSimple setup and AC power supply cord Connecting the antennasSimple setup Setting the time Simple setup Quick SetupDemo function Control guide main unit Control guide main unitControl guide remote control Control guide remote controlDiscs Basic play Discs Basic playPlay Discs Convenient functions Discs Convenient functions Discs Using navigation menus Discs Using navigation menus Discs Using On Discs Using On-screen menusScreen menus Picture Menu Picture Mode Video Output ModeTransfer Mode Other Menu SetupTo show disc information and play position Quick OSD Discs Using On-screen menusTo exit the screen Discs Changing the player’s settings SettingsVideo tab-To make settings to suit your television Disc tab-To choose the language and set a rating levelOthers tab- To make other settings Discs Changing the player’s settingsLanguage code list Radio RadioCassette tapes Play and Recording Cassette tapes Play and RecordingRecording Cassette tapes PlayPress Sound to select a setting Sound field and sound qualityOptimum seating position Manual EQ Press and hold Sound to select Manual EQConvenient functions Press CLOCK/TIMER to select the timer function On time settingOFF time setting Press zPLAY/REC to display the timer indicatorUsing other equipment Using other equipmentUsing other EquipmentGlossary GlossaryTroubleshooting guide Troubleshooting guideSound PictureUnit displays Television displaysListening caution Maintenance Product ServiceWhen moving the unit Limited Warranty only for U.S.A Limited WarrantySpecifications Corporation of North America
Top Page Image Contents