Using other equipment
Before connection
•Disconnect the AC power supply cord.
•Turn off all equipment and read the appropriate operating instructions.
•The equipment connections described are examples only.
➡Page 11 for the position of the remote control buttons.
Peripheral cables and equipment are sold separately
unless otherwise indicated.
Home Theater — Enjoying more powerful sound
Enjoy the powerful movie theater and
Amplifier |
(DVD) IN
Speakers (example) Connect three or more speakers for surround sound.
Optical digital audio cable
Do not bend sharply when connecting.
Using an external unit
You can playback the sound from a video cassette recorder, tape deck, laser disc player, etc., through this unit’s speakers.
Video cassette recorder
Audio cable
| AM ANT | FM ANT |
EXT | LOOP | 75Ω |
AUX
RL
SUBWOOFER
OUT |
|
L | AC IN |
| |
OPTICAL |
|
When connecting a record player
Using other equipment
| AM ANT | FM ANT |
EXT | LOOP | 75Ω |
AUX
RL
SUBWOOFER
OUT
L
AC IN
We recommend using a record player with a
To play
OPTICAL | R |
OUT |
HIGH (6Ω) LOW (6Ω)
SPEAKERS
VIDEO
OUT
PR PB Y
COMPONENT VIDEO OUT
1Press [TUNER/AUX] to select “AUX”.
The unit comes on.
Every time you press the button: FM → AM → AUX
To enjoy multi-channel surround sound
Connect an amplifier with a
Change the settings in “Audio” tab (➡ page 22).
•You can only use DTS Digital Surround decoders that are compatible with DVD.
Recording Output
•With DVD, the following conditions must be met:
–the disc doesn’t have protection preventing digital recording
–the recording equipment can handle signals with a sampling frequency of 48 kHz
•You cannot record WMA/MP3.
When recording DVDs, make the following settings.
–Advanced Surround: SURR OFF (➡ page 26)
–PCM Digital Output: Up to 48 kHz (➡ page 22)
–Dolby Digital and DTS Digital Surround: PCM (➡ page 22)
2Start playback from the external source.
(For details, refer to the external unit’s instruction manual.)
Operating a television
Face the remote control at the television for the following operations.
Turning the television on/off
Press [SHIFT] + [TV^].
Switching the television’s video input mode
Press [SHIFT] + [TV/VIDEO].
Changing channels
Press [SHIFT] + [TV CH 1] or [SHIFT] + [2 TV CH].
Adjusting the volume
Press [SHIFT] + [– TV VOL] or [SHIFT] + [TV VOL +].
Note
Some models cannot be operated by this remote control.
RQT7932
29