Enjoying surround sound
Amplifier with a
•You cannot use DTS Digital Surround decoders incompatible with DVD.
Set “AUDIO OUT” to “OFF”
( page 19, “HDMI” menu), and change
“PCM OUTPUT”, “DOLBY DIGITAL” and “DTS” ( page 19, “AUDIO” menu).
COAXIAL IN
Coaxial cable
Back of the unit
Connect the AC power supply cord last
AC power supply cord (included)
To household AC outlet 
AC IN
Conserving power
This unit consumes a small amount of power, even when it is turned off (1 W). To save power when the unit is not to be used for a long time, unplug it from the household AC outlet.
control/QUICK SETUP
STEP 2 The remote control
Batteries | • Insert so the poles (4 and 3) match those in the remote |
| control. |
| • Do not use rechargeable type batteries. |
R6/LR6, AA | • Do not heat or expose to flame. |
• Do not leave the batteries in an automobile exposed to | |
| direct sunlight for a long period of time with doors and |
| windows closed. |
Do not:
• mix old and new batteries.
•use different types at the same time.
•take apart or short circuit.
STEP 3 QUICK SETUP
•attempt to recharge alkaline or manganese batteries.
•use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. Remove batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.
Use
Aim at the remote control sensor ( page 10), avoiding
obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit.
Connection/The remote
Turn on the television and select the appropriate video input on the television.
1
Power on
2
Shows QUICK SETUP screen.
3
Select
OK
Register
Follow the message and make the settings.
4
OK
Press to finish
QUICK SETUP.
5
Press to exit.
RQTC0152
9
To change these settings later, select “QUICK SETUP” ( page 19, “OTHERS” menu).