Panasonic DVD-S53 warranty Changing the player settings,  Audio menu,  Display menu,  Hdmi menu

Changing the player settings

RQTC0128Changing the player settings

20

 “AUDIO” menu

SETTING STATE	Display the current setting of the items below
PCM OUTPUT	UP TO 48kHz: When connected to equipment compatible
Check the digital		with 44.1 or 48 kHz
input limitations of the	UP TO 96kHz: When connected to equipment compatible
equipment you connect		with 88.2 or 96 kHz
using COAXIAL terminal	• Signals from copy-protected discs are converted to 48
and select the maximum	or 44.1 kHz.
sampling frequency of	• Some equipment cannot handle sampling frequencies
PCM digital output.	of 88.2 kHz, even if they can handle 96 kHz. Read your
	equipment’s operating instructions for details.
DOLBY DIGITAL	BITSTREAM	Select “BITSTREAM” when the equipment
With COAXIAL or HDMI	PCM	can decode the bitstream (digital form of
AV OUT connections		multi-channel data). Otherwise, select “PCM”.
( pages 8 and 9)		(If the bitstream is output to the equipment
DTS	BITSTREAM	without a decoder, high levels of noise can be
With COAXIAL or HDMI	PCM	output and may damage your speakers and
AV OUT connections		hearing.)
( pages 8 and 9)
DYNAMIC RANGE	ON: Adjusts for clarity even when the volume is low
	through compressing the range of the lowest sound level
	and the highest sound level. Convenient for late night
	viewing. (Only works with Dolby Digital.)
	OFF

When audio is output from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will depend on the performance of this connected equipment.

“DISPLAY” menu

SETTING STATE	Display the current setting of the items below
LANGUAGE	ENGLISH FRANÇAIS ESPAÑOL

“HDMI” menu

SETTING STATE	Display the current setting of the items below
VIDEO PRIORITY	ON: When connected through the HDMI AV OUT terminal.
	Video is output from the HDMI terminal. Video is also
	output from the COMPONENT VIDEO OUT terminal,
	but only in 480i (interlace).
	OFF: When connected through the COMPONENT
	VIDEO OUT terminal. Video is output from the
	COMPONENT VIDEO OUT terminal according to the
	setting of “VIDEO OUT (I/P)” ( page 19, “VIDEO”
	menu). Video is also output from the HDMI terminal.

AUDIO OUT	ON: Audio output is from HDMI AV OUT terminal.
	OFF: Audio output is not from HDMI AV OUT terminal.
RGB RANGE	STANDARD
	ENHANCED: When the black and white images are not distinct.
	• It only works when the COLOR SPACE ( page 18,
	On-Screen Menu 4) is set to RGB.
EZ Sync	ON: The EZ SyncTM “HDAVI ControlTM” is available
	( page 24).
	OFF

 “OTHERS” menu

SETTING STATE	Display the current setting of the items below
REGISTRATION	SHOW CODE: You need this registration code to purchase
Displays the unit’s	and play DivX Video-on-Demand (VOD) content
registration code.	( page 24, About DivX VOD contents).
JPEG TIME	To change the slideshow timing
	1 SEC to 15 SEC (in 1 unit)	15 SEC to 60 SEC (in 5 unit)
	60 SEC to 180 SEC (in 30 unit)
	• “3 SEC” is the factory preset.
FL DIMMER	BRIGHT DIM
Changes the brightness	AUTO: The display is dimmed, but brightens only when you
of the unit’s display.	perform some operations.
AUTO POWER OFF	ON: The unit switches to standby mode after about 30
	minutes in the stop mode.
	OFF
QUICK SETUP	SET: Displays the QUICK SETUP settings
DVD-VR/DATA	DVD-VR:To play DVD-VRon DVD-RAM.
Select format to play	DATA: To play MP3 or JPEG	contents on DVD-RAM.
DVD-RAM discs.
DEFAULTS	RESET
This returns all values in	The password screen is shown if “RATINGS” ( page 19) is
the Setup menus to the	set. Please enter the same password and press [ENTER],
default settings.	then turn the unit off and on again.