Panasonic TX-L32C5E, TX-L42U5E Part Names and Functions, TV Controls/ Indicators, TV Side / Back

PART NAMES AND FUNCTIONS

TV Controls/ Indicators

1 Remote Control Signal Receiver

• Do not place any objects between the TV remote control signal receiver and remote control.

2	Power Indicator
	Red: Standby
3	Green: On
	Green blink: Receiving a command from

the remote control.

	4	3	VOL +/-
		• Used to change volume.
		• Used to adjust the value of the selected item
	5	on On-Screen Menu.
		4	CH	/
		Used to change channels.
	6	•• Used to select item on On-Screen Menu.
	7	5	MENU
1	2	• Open or close the On-Screen Menu.
		6	INPUT/OK
		• Use to select an input source.
		• Confirm and enter a selection.
		7		(POWER)
		• Use to turn the TV On or Off.

TV (Side / Back)

	AV IN		ST3	Manufactured under license
				from Dolby Laboratories.
	PC AUDIO			Dolby and the double-D
				symbol are trademarks of
	via AV 2			Dolby Laboratories.
	*1
	ST3
				>PC<
	>PC<
1	2	34	5	6

*1: HDMI 3 is only for TX-L42U5E model.

Note:

The examples used throughout this manual are based on the TX-L32C5E model.

	1	HDMI 1/HDMI 2/HDMI 3*1
	• Connect all kinds of HDMI output equipment.
	• When connecting a DVI device using an
	HDMI-DVI adapter, connect the device to the
	HDMI1 jack.
	2	AV 2
	• Connect video and audio output from video
	equipment.
	3	DIGITAL AUDIO OUT
	• Connect an audio amplifier to this jack.
7	4	PC
	• Connect computer outputs to this terminal.
	• Connect an audio cable to L/R jacks of AV2
	and audio out jack on the computer.
	5	AV 1
8	• Full SCART, which transmits RGB, S-Video and
	CVBS in, and audio/video out (Analogue only).
	6	Aerial Jack
9	• Connects to TV RF signals (Aerial/CATV).
	7	Common Interface
	• The Common Interface Module menu
	provides access to software contained on
	Common Interface (CI) Modules.
	8	Headphone
	• Connect a headphone (stereo) to this jack and
	the TV speaker out will be muted.
	9	USB
	• Connect USB memory stick to this terminal to

play Multimedia.

9