AC Power Cord Connection
This LCD TV uses nominal input voltages of
Caution
• For safety, unplug AC power cord when the LCD TV is not in use.
Remote Control Batteries Installation
1.Remove the battery compartment cover.
2.Insert two size R03 AAA batteries (1.5V) according to “+” and
3.Close the battery compartment cover.
Aerial or Cable Connection
Cable used for connection (This Outdoor Aerial cable is not
supplied• with this LCD TV.) Aerial Cable
AV IN | ST3 | Manufactured under license | ||
|
|
|
| from Dolby Laboratories. |
|
| PC AUDIO |
| Dolby and the |
|
|
| symbol are trademarks of | |
|
| via AV 2 |
| Dolby Laboratories. |
*1
ST3 |
>PC<
*1: HDMI 3 is only for
•The examples used throughout this manual are based on the
•For all aerial circuit problems, please consult your local dealer.Note:
Caution
To insure safe operation, please observe the following
•Replace two batteries at the same time.
•Do not use a new battery with a used battery.
•Avoid contacting with water or liquid.
•Do not expose the Remote Control or Batteries to moisture, or heat such as sunshine, fire or the like.
•Do not drop the Remote Control.
•If a battery has leaked on the Remote Control, carefully wipe case clean and install new batteries.
•Risk of explosion if battery is replaced by an incorrect type.
•Dispose of used batteries according to the instructions.
•Remote control contains R03 AAA battery and must be kept out of reach of small children to avoid accidental ingestion.
•Replace only with same or equivalent type. Do not mix different battery types (such as alkaline and manganese batteries).
•Do not use rechargeable
11