HOW TO USE SPRAY WAND
Your pressure washer is equipped with a
When using the high pressure setting, DO NOT allow the
in contact with unprotected skin, eyes, or with any pets or animals. Serious injury can occur.
Risk of injection or injury to person. DO
NOT direct discharge stream toward persons.
For high pressure operation, pull back the nozzle of the
spray wand as shown.
The high pressure spray from your
pressure washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray.
HOW TO APPLY CHEMICALS AND CLEANING SOLVENTS
Applying chemicals or cleaning solvents is a low pressure operation. NOTE: Use only soaps and chemicals designed for pressure washer use. Do not use bleach.
spray wand as shown.
High
Pressure
To Apply chemicals:
1.Press chemical hose onto barbed fitting located near high pressure hose connection of pump as shown.
Barbed Fitting
The nozzle at the end of the multi- adjustable spray wand can be rotated to change the high pressure spray pattern from a 0º pencil stream to a 40º fan spray, as shown. Markings have been placed on the nozzle to help you select the spray pattern.
40º fan spray |
| 0º pencil stream |
|
|
|
For low pressure operation, extend the nozzle of the
Low
Pressure
2.Place other end of chemical hose with filter on it into container holding chemical/cleaning solution. NOTE: For every 7 gallons of water pumped 1 gallon of chemical/cleaning solution will be used.
3.Set
4.After use of chemicals, place chemical hose into container of clean water and draw clean water through chemical injection system to rinse system thoroughly. If chemicals remain in the pump it could be damaged. Pumps damaged due to chemicals will not be covered under warranty.
NOTE: Chemicals and soaps will not siphon when spray wand is in the high pressure setting.
9- ENG | A00521 |