Engine Frame and Wheel Assembly
CARTON CONTENTS
Accessories Panel |
| ||
Engine | English/ |
| |
Spanish/French | Handle | ||
Manual | |||
Operation |
| ||
|
| ||
| Manual |
|
Accessories Panel
Allen Wrench and Cleaning Tool
Chemical
Hose
Bagged Parts
| Spray Gun | |
|
| |
High Pressure | Engine |
|
Oil |
| |
Hose |
| |
|
| |
| ASSEMBLY INSTRUCTIONS |
1.Place handle assembly onto frame, depress the snap buttons, and slide the handle assembly onto the frame until snap buttons snap into place.
2.Connect wand to gun.Tighten securely.
c.Place grooves in accessories panel assembly onto screws and slide panel assembly into place.
Screws
3.Attach high pressure hose to gun. Tighten se- curely.
4.To Assemble Accessories Panel a. Remove
top | Remove |
| |
screws on |
|
handle |
|
assembly. |
|
b.Loosen Loosen bottom
screws on handle assembly.
d.Place screws (removed earlier) into the top holes and secure accessories panel assembly to handles. Do not overtighten.
5.Add engine oil (supplied) to engine. Refer to Engine Owners Manual supplied by engine manufacturer for correct procedure.
NOTE: There will be a slight amount of oil in the engine from factory testing.
A00521 | 6- ENG |