Panasonic TC-L32DT30, TC-L37DT30 Getting started Accessories/Optional Accessories, Location

Attaching the pedestal to TV

■Assembling the pedestal

Fix securely with assembly screws		A	Attach the cover
(Total 4 screws).			• Place the cover so that it covers up the screws for the bracket.
			• Insert the protrusion of the cover into the opening of the bracket.
Tighten screws firmly.
			* The cover has a nick on the back.
A			Attach the cover so that the nick fits underneath the bracket.
Bracket	Hold the bracket			Accessories
	not to fall over
				Assembly screws
				(4 of each)
			Cover	A
		Front		XSS5+15FNK
			Nick on the back	size(M5 x 15)
				B
Front	Base		of the cover
				XYN4+F30FJK
(image: TBL5ZX0104)
				size (M4 × 30)
■Set-up				Bracket (1)
Fix securely with assembly screws		(Total 4 screws).		●TBL5ZA3119
Tighten screws firmly.

B

B

		Cover (1)
	Back of	●TBL5ZB3087
	the TV
Foam mat or		Base (1)
thick soft cloth	Cover	●TBL5ZX0104 (TC-L32DT30)
(image: TC-L32DT30)	Bracket	●TBL5ZX0106 (TC-L37DT30)

WARNING

Do not disassemble or modify the pedestal.

Otherwise the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any pedestal other than that provided with this TV.

Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

Location

Place the TV at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent an internal component failure. Keep away from areas of excessive heat or moisture.

Adjust the LCD panel			TC-L32DT30
			a: 9.6 ” (242 mm)
to your desired angle.		15°
	a		b: 13.8 ” (350 mm)
		15°	TC-L37DT30
		b	a: 10.8 ” (273 mm)
Note		(View from above)	b: 14.8 ” (375 mm)

Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range. Do not place any objects or hands within the full rotation range.

Getting started Accessories/Optional Accessories

9