Panasonic TC-65PST34 Settings Items Item Description PC adjustments, Sync, On green, Dot clock

Settings	Items	Item Description
PC adjustments	Reset to defaults	Resets PC adjustments.
	Sync	H & V	The H and V sync signals are input from the HD/VD connector.
			(p. 56)
		On green	Uses a synchronized signal on the Video G signal, which is
			input from the G connector. (p. 56)
	Dot clock	Alleviates the problem if a picture appears to be vertically-striped, flickers partially or
		is blurred.
	H-position	Adjusts the horizontal position.
	V-position	Adjusts the vertical position.

Clock phase Alleviates the problem if the whole picture appears to flicker or is blurred.

First adjust the Dot Clock to get the best possible picture, then adjust the clock Phase so that a clear picture appears.

●It may not be possible to display a clear picture due to poor input signals.

Input resolution

Switches to wide display.

●VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels), WXGA (1,280×768 pixels)

●Options change depending on signals

H-frequency V-frequency

Displays the H (Horizontal)/V (Vertical) frequencies. Display range

Horizontal:15 - 110 kHz

Vertical: 48 - 120 Hz

HDMI settings	HDMI/DVI RGB	Auto/	Prevents the blown out highlights and blocked up shadows when
	range (HDMI 1-3)	Standard	a wide-range signal is received. Selects between standard RGB
		(16-235)/	range (16-235 bits) or non-compliance (0-255 bits).
			Auto: Switches the RGB range (Standard (16-235)/
		Nonstandard
			Nonstandard) depending on the HDMI signal information.
	Contents type	Off/Auto/Photo/	Sets content type to each HDMI input.
	(HDMI 1-3)	Graphics	Auto: Switches content type automatically depending on the
			HDMI signal information.
			Photo: Best setting for JPEG viewing.
			Graphics: Best setting for On-Screen display of connected
			equipment.

•Some menus are grayed out depending on the input signal or condition.

(e.g. “3:2 pulldown” will be grayed out if the input signal is high definition or you are viewing photos, etc.)

Advanced	3D Y/C filter	Off/On	Minimizes noise and cross-color in the picture.
picture	Color matrix	SD/HD	Selects image resolution of component-connected devices.
			SD: Standard Definition	HD: High Definition
			Only used with 480p video signal.
	Block NR	Off/On	Reduces noise of specific digital signals of DVD, Cable box, etc.
	Mosquito NR	Off/On	Reduces HDTV flicker noise in the contoured sections of an
			image
	Motion smoother	Off/Weak/Strong	Improved moving picture quality by reducing motion blur.
	Black level	Dark/Light	Selects Dark or Light. Valid only for external input signals.
	3:2 pulldown	Off/On/Auto	Adjusts the picture recorded in 24 fps for optimum quality.
	24p Direct in	60Hz/48Hz	48Hz: Achieves more cinematic playback by reproducing the
			movie contents at twice the speed of 24 frames per second.

48