Setup | Other function settings | |
Settings | Items | Item Description |
3D settings | See p.25 for more detail. | |
Channel surf | All/Favorite/ | Sets the mode to select the channel with the Channel up/down button. |
mode | Digital only/ | Favorite: Only channels registered as FAVORITE. (p. 20) |
| Analog only |
|
Language | English/Español/ | Selects the screen menu language. |
| Français |
|
Clock |
| Adjusts the clock. (p. 17) |
ANT/Cable setup See p.
Input labels | Selects the terminal and label of the external equipment. | ||
(Display labels | Devices connected to external input terminals can be labeled for easier identification during the | ||
of connected | input selection. (Input select (p. 23)) |
| |
devices) | Terminals: HDMI | ||
| Label: [BLANK] | ||
| RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/MONITOR/AUX/ | ||
| OTHER/Not used |
| |
| • You can also enter the label name directly. (Entering characters (p. 21)) | ||
Anti Image | Pixel orbiter | Enable/Disable | Enable: Shifts the display image automatically. |
retention | (Wobbling) |
|
|
(Prevent Image | 4:3 side bars | Off/Dark/Mid/ | Changes the brightness of the side bar |
retention) | (4:3 mode only) | Bright | The recommended setting is “Bright” to prevent the panel |
|
|
| “Image retention”. (p. 56) |
Scrolling bar | Press “OK” to start the horizontal “Scrolling” on the screen. | [Scrolling bar] |
| • Press any key except the POWER key to return to previous |
|
|
| |
| screen. |
|
• You will return to the previous screen if no key operation has been performed for 15 minutes.
Network settings See p.
VIERA Link settings See p.
ECO/energy | No signal for 10 | To conserve energy, the TV automatically turns off when NO SIGNAL and NO |
saving | minutes | OPERATION continue for more than 10 minutes. |
| (Stay on/ Power | • Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set. |
| TV off) | • “No signal for 10 minutes was activated” will be displayed for about 10 seconds |
| when the TV is turned on for the first time after the power was turned off by “No | |
|
| signal for 10 minutes”. |
|
| • The |
|
| minutes prior to the |
How to Use Menu Functions
Advanced
No activity for 3 hours
(Stay on/ Power TV off)
To conserve energy, the TV automatically turns off when no operation of remote and side panel key continues for more than 3 hours.
•Not in use when “Auto power on” is set to “Yes”, or “On/Off Timer” is set, or while “PC input” is selected.
•“No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is turned on for the first time after the power was turned off by “No activity for 3 hours”.
•The
Keyboard type | Select keyboard type. Operate USB keyboard (p. 21) | ||
|
| (U.S./Canadian French/Canadian Multilingual Standard/Spanish (Latin | |
|
| America)/Spanish (Spain)) | |
Advanced setup Auto power on | Turns TV On automatically when the cable box or connected device is turned On. | ||
| (No/Yes) | TV AC cord must be plugged into this device. TV turns on every time the power is restored. | |
| Image viewer | Slideshow/Photos/ | Sets the media contents or playback type to play back SD |
| auto play | Videos/Music/ | cards automatically. |
|
| Set later/Off | Set later: “Image viewer settings” menu will be displayed repeatedly. |
|
| “Using Media player” (p. 26) | |
|
|
| |
| VIERA Connect | Sets the banner display status. | |
| Banner (On/Off) |
|
|
First time setup | Restarts the first time setup from “Language” setting. (p. 14) | ||
About | Displays TV version and software license. | ||
Reset to defaults | Performing Reset will clear all settings made with Setup, such as channel settings. | ||
|
| • Password setting/entering (p. 21) | |
51