Panasonic TC-58PS14, TC-65PS14 warranty Setup, Sub menu list

(Continued)

■Menu list

Menu		Item		Adjustments/Configurations (alternatives)
			Sets the mode to select the channel with Channel up/down button
	Channel surf mode		(All/Favorite/Digital only/Analog only)
			• Favorite: Only channels registered as FAVORITE
	Language		Selects the screen menu language
	Clock		Adjusts the clock
	ANT/Cable setup		Sets channels
	Connected devices	Input labels	Selects the terminal and label of the external equipment
	Anti		Prevents “Image retention” with Wobbling. (Automatic/Periodic)
		Pixel orbiter	•	Automatic: Shifts the display image automatically.
	Image		•	Periodic: Shifts the display image every (1/2/3/4) minutes according to what was set in the
				“Time (minutes)” menu.
		Time (minutes)	Sets the time for “Pixel orbiter-Periodic” setting. (1/2/3/4)
	retention
		4:3 side bars	Change the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)
			•	The recommended setting is “Bright” to prevent panel “Image retention”.
		Scrolling bar	Press “OK” to start horizontal “Scrolling” on the screen
		VIERA Link	Controls equipment connected to HDMI terminals (On/Off)
				“Power off link”, “Power on link”, “Stand-by power save”, “Auto power stand-by” and “Default
	VIERA		• speakers” cannot be selected if “Off” is set.
		Power on link	Sets “Power on link” of HDMI connection equipment (Yes/No)
		Power off link	Sets “Power off link” of HDMI connection equipment (Yes/No)
	Link
Setup		Stand-by power	Set “Stand-by power save” of HDMI connection equipment. (No/Yes)
	settings	save
		Auto power	Set “Auto power stand-by” of HDMI connection equipment.
		stand-by	(No/Yes (with reminder)/Yes (no reminder)
		Default	Selects the default speakers (TV/Theater)
		speakers
			To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is
			performed for more than 10 minutes. (Enable/Disable)
			Note
	ECO/power	No signal for 10	•	Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD mode” or Digital
		minutes		channel.
			• “No signal for 10 minutes was activated” will be displayed for about 10 seconds when the
			•	TV is turned on for the first time after turning the power off by “No signal for 10 minutes”.
				The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
				prior to the shut-off.
			To conserve energy, the TV automatically turns off when no operation of remote or side panel
	saving
			key continues for more than 3 hours. (Enable/Disable)
			Note
		No activity for 3	•	Not in use when setting “Auto power on” or “On/Off Timer”.
		hours	•	“No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is
			•	turned on for the first time after turning the power off by “No activity for 3 hours”.
				The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
				prior to the shut-off.
	Advanced setup		Turns TV On automatically when the cable box or a connected device is turned On (No/Yes)
			TV AC cord must be plugged into this device. TV comes on every time the power is restored.
		Auto power on	•	The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on”
				is set.
		Play SD card	Set “Thumbnail” or “Slideshow” to play back SD cards automatically.
		automatically	(Slideshow/Thumbnail/Set later/Off)
	About		Displays TV version and software license.
	Reset to defaults		Performing Reset will clear all items set with Setup, such as channel settings.

■Sub menu list

Menu

Setup SUB MENU

Item	Adjustments/Configurations (alternatives)
Channel surf mode	Sets the mode to select the channel with Channel up/down button
	(All/Favorite/Digital only/Analog only)
Set favorite	Sets favorite channels.
Edit CH caption	Changes the station identifier.
Signal meter	Checks the signal strength if interference or freezing occurs on a digital image.	17