Notes
Do not display a still picture for a long time
This causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is not covered by the warranty.
4 : 3 | 12 |
|
Typical still images
•Channel number and other logos
•Image displayed in 4:3 mode
•SD Card photo • Video game • Computer image
To prevent “Image retention”, the screen saver is automatically activated after a few minutes if no signals are sent or no operations are performed.
■Set up
Do not place the unit where it’s exposed to sunlight or other bright light (including reflections).
Use of some types of fluorescent lighting may reduce the remote control’s transmission range.
Accessories/Optional Accessory
Accessories
Check you have all the items shown. (Accessories)
Remote Control
Transmitter
N2QAYB000321
Pedestal
TBLX0102
Batteries for the | Cleaning | HDMI cable | AC cord |
Remote Control | cloth | K1HA19DA0005 |
|
Transmitter (2) |
| 6.6 ft (2.0 m) |
|
AA Battery |
|
|
|
|
| Operating Instructions (Book) | |
TBLX0126 |
| Operating Instructions | |
| Viera Concierge and basic instruction for HDTV | ||
Product Registration Card (U.S.A.)
Customer Care Plan Card (U.S.A.)
Optional Accessory
Wall-hanging bracket (angle)
Note
In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensed contractor to secure the
Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take steps to prevent the TV from tipping over. 
Handle the TV carefully during installation since subjecting it to impact or other forces may cause its panel to crack.
Installing the remote’s batteries
Open
Hook
Close
Note the correct polarity (+ or
Caution
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
•Do not mix old and new batteries.
•Do not mix different battery types (such as alkaline and manganese batteries).
•Do not use rechargeable
Do not burn or break batteries.
5