Panasonic TC-60PS34 Wireless network Wireless network setting, IP address/DNS settings

Page 36

Wireless network (Wireless network setting)

■Sets / Changes wireless network setting

Press “Wireless network” and display setting screen Follow the directions on screen to complete the setting

Wireless network

select

Please choose connection method:

OK

Search for wireless networks

WPS (Wi-Fi Protected Setup using push button)

WPS (Wi-Fi Protected Setup using PIN number)

Manual settings

* Wi-Fi Protected Setup is an easy setting of the Wi-Fi Alliance’s certification

●For more details on setting of an Access point, please refer to operating manual for the Access point.

Search for Wireless networks:

Select an access point from the ones searched for automatically, and configure the settings as instructed on the screen.

WPS (Wi-Fi Protected Setup* using push button): You can connect the Access point to press the buttons.

WPS (Wi-Fi Protected Setup using PIN number): Set the PIN code that is displayed on the TV on the Access point.

Manual settings:

Manually set SSID, Security type, and Encryption type to match the settings of the Access point to which to connect.

●When connecting by 11n (5 GHz), select “AES” as the Encryption type for the wireless LAN.

IP address/DNS settings

Select “IP/DNS setting mode” and set to “Automatic”

(When IP/DNS automatic acquisition in DHCP can be used)

Menu

IP address/DNS settings

 

select

 

IP setting mode

Automatic

 

 

IP address

192.168.0.5

 

 

Subnet mask

255.255.255.0

OK

 

Default gateway

192.168.0.254

 

 

 

DNS setting mode

Automatic

 

 

DNS

192.168.0.20

 

The acquired address is displayed.

■Manual setting

Select “IP/DNS setting mode” and set to “Manual”

Select the item and press OK

Check the specifications of the broadband router and enter each IP address.

Or Enter each IP address as was specified by the provider

IP address

0

.

0 .

0 .

0

 

 

 

 

 

 

Each IP address is acquired automatically

If you are using a broadband router, IP automatic acquisition in DHCP can be used under normal circumstances. If you are not sure, check with the person who installed the equipment, or check the instructions for each device.

Proxy setting

Set only if specified by the provider. It is not required for normal household use.

Select “Proxy setting”

Menu

IP address/DNS settings

 

select

 

IP setting mode

Automatic

 

 

IP address

192.168.0.5

 

 

Subnet mask

255.255.255.0

OK

 

Default gateway

192.168.0.254

 

DNS setting mode

Automatic

 

 

DNS

192.168.0.20

 

 

Proxy setting

 

 

Select item and press OK

Menu

Proxy setting

 

select

 

Proxy address

 

 

 

Proxy port

0

OK

Enter address or port number and press OK

●Entering characters (p. 19)

■Proxy address

This is the address of the relay server that is connected to the target server instead of the browser and sends data to the browser. Setting is only required if specified by the provider.

■Proxy port

This number is specified by the provider together with the Proxy address.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents English Inches measured diagonallyViera Set up Do not display a still picture for a long timeTypical still images Contents Safety Precautions Important Safety InstructionsAC Power Supply Cord Handling the power supply cordWhen Moving the Plasma TV To prevent fire or electric shockCEA Child Safety Notices Accessories Optional AccessoryAccessories Wall-hanging bracketAssembly screws Assembly screws Bottom viewAttaching the pedestal to TV Removing the pedestal from the TVGetting started Accessories/Optional Accessory Installing the remote’s batteriesPower cord connection To attach To removeConnections Connection PanelsAntenna or Cable connection VHF/UHF AntennaStarted Connections AV cable connectionAudio connection PC / Computer connection VGATV controls/indicators Remote controlIdentifying Controls Front of the TVFirst Time Setup Turn the TV On with the Power buttonConfigure your viewing mode Identifying ControlsANT/Cable setup Select signal type Cable/AntennaLabel the inputs for easy identification Label inputs Select scan typeAdjust the Clock Set clock Started First TimeComplete First time setup About wireless LANWireless network First time setup Display Wireless network Select the connection methodTurn power on Watching TVSelect a channel number Change aspect ratio and Zoom the picture Display the SUB MenuCall up a favorite channel Password setting/entering Entering charactersOperate USB keyboard Watching TVUsing Viera Tools Display Viera Tools Select the itemSet each item Press to go back to the previous screenDisplay the Input select menu Select the input mode From external devices ToolsUsing Media player Basic features for Media playerMedia information Insert Media SD card or USB flash memory Display Media playerSelect Drive Select the data Photos/Videos/MusicDisplay Setup SUB Menu and select item Slideshow settings p Thumbnails sizeSort Photo optionsSlideshow settings Soundtrack settingsSlideshow Media playerSelect Video options in Setup SUB Menu Video optionsVideos view Repeat playbackUsing Other settings in Media playerMusic options Music viewViera LinkTM Hdavi ControlTM VersionHdmi cable Equipment onlyViera LinkTM Hdavi ControlTM Viera Link Connections with Viera Link functionDisplay the menu Select Viera Link settings in Setup Viera Link settings and Available featuresSelect Viera Link Automatic Input Switching Power on linkPower off link Energy saving modeViera Link menu and Available features Display the Viera Link menuSelect SetViera Link control only with the TV’s remote control Speaker controlBack to TV Using Network services Contact your Broadband service providerSelect wired or wireless connection Connecting to the InternetDisplay the menu Select Network settings Select the settings and setNetwork services Network settingsWireless network Wireless network setting IP address/DNS settingsProxy setting Software update Network cameras listOther settings Using Easy IptvUsing USB keyboard Display Menu Adjust the Picture and AudioViera Link control only with the TV’s remote control p Default camera setting pView Network CameraEditing and Setting Channels Display the menu Select SetupSelect ANT/Cable setup ANT/Cable setup and operationSetting Channels Signal meter Check signal strengthManual program Set manually How to Use Menu Functions Select the item and adjustDisplay the menu Select the menuHow to Use Menu Functions Hdmi settings Contents type Off/Auto/PhotoSync On greenAudio settings Adjust Audio quality Settings Items Item Description Mode Off Channel ModeProgram Mode Mode On/OffSetup Other function settings Age-based Possible Content Description Group Ratings List for parental controlSelections Technical Information Aspect Ratio FormatSize Aspect RatioData format information SD Card/USB flash memory warning messagesRecommended USB device connections Technical Information Support Information Viera LinkTM Hdavi ControlTMHdmi connection Digital Audio OUT terminalInput signal that can be displayed Side barsPC Input Terminals Care and Cleaning First, unplug the Power cord plug from the wall outletDisplay panel CabinetChange settings of Closed Caption CC. p Questions AnswersEnsure all connections are correct and secure Frequently Asked Questions FAQ Support Information OtherQuestions How do I get Easy Iptv to work on my TV? How do I check for the latestMy TV? Software firmware version forSpecifications Page Index Index Support InformationLimited Warranty Coverage On-Site or Carry-in ServiceLimited Warranty Limits And Exclusions One Panasonic Way Secaucus, New JerseyCustomer Services Directory United States and Puerto Rico Accessory Purchases United States and Puerto RicoFor hearing or speech impaired TTY users, TTY Limited Warranty for Canada Panasonic Product Limited WarrantyLimited Warranty for Canada Support InformationCustomer’s Record Ambler Drive
Top Page Image Contents