Panasonic TC-60PS34 Sync, On green, Dot clock, Position, Hdmi settings, Auto, Range Hdmi Standard

Page 44

Settings

Items

Item Description

 

PC adjustments

Reset to defaults

Resets PC adjustments.

 

Sync

H & V

The H and V sync signals are input from the HD/VD connector. (p. 52)

 

 

On green

Uses a synchronized signal on the Video G signal, which is

 

 

 

input from the G connector. (p. 52)

 

Dot clock

Alleviates the problem if a picture appears to be vertically-striped, flickers partially or

 

 

is blurred.

 

 

H-position

Adjusts the horizontal position.

 

V-position

Adjusts the vertical position.

Clock phase Alleviates the problem if the whole picture appears to flicker or is blurred.

First adjust the Dot Clock to get the best possible picture, then adjust the clock Phase so that a clear picture appears.

It may not be possible to display a clear picture due to poor input signals.

Input resolution

Switches to wide display.

VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels), WXGA (1,280×768 pixels)

Options change depending on signals

H-frequency V-frequency

Displays the H (Horizontal)/V (Vertical) frequencies. Display range

Horizontal:15 - 110 kHz

Vertical: 48 - 120 Hz

HDMI settings

HDMI/DVI RGB

Auto/

Prevents the blown out highlights and blocked up shadows when

 

range (HDMI 1-3)

Standard

a wide-range signal is received. Selects between standard RGB

 

 

(16-235)/

range (16-235 bits) or non-compliance (0-255 bits).

 

 

Auto: Switches the RGB range (Standard (16-235)/

 

 

Nonstandard

 

 

Nonstandard) depending on the HDMI signal information.

 

Contents type

Off/Auto/Photo/

Sets content type to each HDMI input.

 

(HDMI 1-3)

Graphics

Auto: Switches content type automatically depending on the

 

 

 

 

 

 

HDMI signal information.

 

 

 

Photo: Best setting for JPEG viewing.

 

 

 

Graphics: Best setting for On-Screen display of connected

 

 

 

equipment.

Some menus are grayed out depending on the input signal or condition.

(e.g. “3:2 pulldown” will be grayed out if the input signal is high definition or you are viewing photos, etc.)

Advanced

3D Y/C filter

Off/On

Minimizes noise and cross-color in the picture.

picture

Color matrix

SD/HD

Selects image resolution of component-connected devices.

 

 

 

SD: Standard Definition

HD: High Definition

 

 

 

Only used with 480p video signal.

 

Block NR

Off/On

Reduces noise of specific digital signals of DVD, Cable box, etc.

 

Mosquito NR

Off/On

Reduces HDTV flicker noise in the contoured sections of an

 

 

 

image

 

 

Black level

Dark/Light

Selects Dark or Light. Valid only for external input signals.

 

3:2 pulldown

Off/On/Auto

Adjusts the picture recorded in 24 fps for optimum quality.

 

24p Direct in

60Hz/48Hz

48Hz: Achieves more cinematic playback by reproducing the

 

 

 

movie contents at twice the speed of 24 frames per second.

44

Image 44
Contents Viera EnglishInches measured diagonally Typical still images Set upDo not display a still picture for a long time Contents Safety Precautions Important Safety InstructionsAC Power Supply Cord Handling the power supply cordWhen Moving the Plasma TV To prevent fire or electric shockCEA Child Safety Notices Accessories Optional AccessoryAccessories Wall-hanging bracketAssembly screws Assembly screws Bottom viewAttaching the pedestal to TV Removing the pedestal from the TVGetting started Accessories/Optional Accessory Installing the remote’s batteriesPower cord connection To attach To removeConnections Connection PanelsAntenna or Cable connection VHF/UHF AntennaStarted Connections AV cable connectionAudio connection PC / Computer connection VGATV controls/indicators Remote controlIdentifying Controls Front of the TVFirst Time Setup Turn the TV On with the Power buttonConfigure your viewing mode Identifying ControlsANT/Cable setup Select signal type Cable/AntennaLabel the inputs for easy identification Label inputs Select scan typeAdjust the Clock Set clock Started First TimeComplete First time setup About wireless LANWireless network First time setup Display Wireless network Select the connection methodSelect a channel number Turn power onWatching TV Call up a favorite channel Change aspect ratio and Zoom the pictureDisplay the SUB Menu Password setting/entering Entering charactersOperate USB keyboard Watching TVUsing Viera Tools Display Viera Tools Select the itemSet each item Press to go back to the previous screenDisplay the Input select menu Select the input mode From external devices ToolsMedia information Using Media playerBasic features for Media player Insert Media SD card or USB flash memory Display Media playerSelect Drive Select the data Photos/Videos/MusicDisplay Setup SUB Menu and select item Slideshow settings p Thumbnails sizeSort Photo optionsSlideshow settings Soundtrack settingsSlideshow Media playerSelect Video options in Setup SUB Menu Video optionsVideos view Repeat playbackUsing Other settings in Media playerMusic options Music viewViera LinkTM Hdavi ControlTM VersionHdmi cable Equipment onlyViera LinkTM Hdavi ControlTM Viera Link Connections with Viera Link functionSelect Viera Link Display the menu Select Viera Link settings in SetupViera Link settings and Available features Automatic Input Switching Power on linkPower off link Energy saving modeViera Link menu and Available features Display the Viera Link menuSelect SetBack to TV Viera Link control only with the TV’s remote controlSpeaker control Using Network services Contact your Broadband service providerSelect wired or wireless connection Connecting to the InternetDisplay the menu Select Network settings Select the settings and setNetwork services Network settingsProxy setting Wireless network Wireless network settingIP address/DNS settings Software update Network cameras listOther settings Using Easy IptvUsing USB keyboard Display Menu Adjust the Picture and AudioViera Link control only with the TV’s remote control p Default camera setting pView Network CameraEditing and Setting Channels Display the menu Select SetupSelect ANT/Cable setup ANT/Cable setup and operationManual program Set manually Setting ChannelsSignal meter Check signal strength How to Use Menu Functions Select the item and adjustDisplay the menu Select the menuHow to Use Menu Functions Hdmi settings Contents type Off/Auto/PhotoSync On greenAudio settings Adjust Audio quality Settings Items Item Description Mode Off Channel ModeProgram Mode Mode On/OffSetup Other function settings Selections Age-based Possible Content Description GroupRatings List for parental control Technical Information Aspect Ratio FormatSize Aspect RatioRecommended USB device connections Data format informationSD Card/USB flash memory warning messages Technical Information Support Information Viera LinkTM Hdavi ControlTMHdmi connection Digital Audio OUT terminalPC Input Terminals Input signal that can be displayedSide bars Care and Cleaning First, unplug the Power cord plug from the wall outletDisplay panel CabinetEnsure all connections are correct and secure Change settings of Closed Caption CC. pQuestions Answers Questions Frequently Asked Questions FAQ Support InformationOther How do I get Easy Iptv to work on my TV? How do I check for the latestMy TV? Software firmware version forSpecifications Page Index Index Support InformationLimited Warranty Coverage On-Site or Carry-in ServiceLimited Warranty Limits And Exclusions One Panasonic Way Secaucus, New JerseyFor hearing or speech impaired TTY users, TTY Customer Services Directory United States and Puerto RicoAccessory Purchases United States and Puerto Rico Limited Warranty for Canada Panasonic Product Limited WarrantyLimited Warranty for Canada Support InformationCustomer’s Record Ambler Drive