Panasonic TX-76PW155A, TX-86PW155A Setup menu Geomagnetic Correction, Using the Front Panel

Setup menu - Geomagnetic Correction

Magnetic interference may come from such things as unshielded motors, moving the TV while it is switched ON, turning off a vacuum cleaner too close to the TV, lightning strikes nearby or many other things. If geomagnetic changes cause colour patches on the screen switch your Television OFF for 30 minutes and then switch it back ON.

Slight tilting of the picture may be noticeable or coloured patches may sometimes appear at the corners of the screen (colour purity).

The Geomagnetic Correction feature can be used to eliminate some interference problems.

Adjustment for geomagnetic should be performed every time the location of the TV is changed.

In some cases colour patches will not be completely eliminated even after adjustment, particularly in ferroconcrete buildings and other structures susceptible to geomagnetic effects. In these cases the TV location will have to be changed.

Using the Front Panel

Push the F button repeatedly to access the Geomagnetic Correction Menu.

000

Geomagnetic correction

-, + : Adjust tilt

F : To exit

STR F - / V + / ^ TV/AV

Push - / \/ or + / /\ to adjust the picture tilt or coloured patches as necessary. (The adjustment range is from -16 to +16).

Push the F button to return to normal viewing.

Using the Remote Control

Push the SET UP button.

Select the Geomagnetic Correction

Menu.

Access the Geomagnetic Correction.

000

Geomagnetic correction

Adjust tilt

Return

TV/AV Exit

Adjust the picture tilt or coloured patches as necessary. (The adjustment range is from -16 to +16).

Push the TV/AV button to return to normal viewing,

or

Push the SET UP button to return the

TV to the Set Up Menu.

18