Remote Control Television Operation
BUTTON | WHAT IT DOES |
STANDBY
The remote control button is used to turn the television into Standby mode. When the television is in
PICTURE
This button is used to select the picture menu. Please refer to page 14 for detailed operating instructions.
SOUND
This button is used to select the sound menu. Please refer to page 15 for detailed operating instructions.
SET UP
This button is used to select the set up menu. Please refer to page 16 for detailed operating instructions.
RECALL
Pressing this button will display all current active functions. Pressing the button again cancels the recall function and removes the text being displayed on the screen. If the button is not pressed within about 2 seconds it automatically switches to display the Programme Number or theAV Number and the
The recall button also allows you to change channel. The coloured buttons are used to select the channel range.
VCR - > 24
25 - > 49
50 - > 74
75 - > 99
Use the UP and DOWN buttons to highlight the channel you want and press the Blue button. The TV will switch to the selected channel. Use the Red and Green buttons to select a different range of channels.
Page -
Page +
OK
DIRECT TV RECORD
Allows immediate recording of the programme currently on the screen. (This function only works with a
AMBIENCE
This button switches the ambience (surround sound) on and off.
ASPECT
This button is used to move through the different aspect options of AUTO, 16:9, 14:9, 4:3, Zoom 1, Zoom 2, Zoom 3. Please refer to page 19.
C (DIRECT CHANNEL SELECTION)
To directly access broadcast channel numbers, press the C Button followed by the two digits required (e.g. C02, C28 etc).
Please refer to drawing on Page 9 for location of Remote Control Buttons.
11