Panasonic TC-P42G25 Displaying PC Screen on TV, Display the Input select menu, Select PC, Picture

Displaying PC Screen on TV

The screen of the PC connected to the unit can be displayed on the TV.

You can also listen to PC sound with the audio cable connected. To connect PC. (p. 53)

Display the Input select menu

Input select

1	TV
2	HDMI 1	GAME

3HDMI 2

4	HDMI 3	GAME
5	Component 1	AUX

6Component 2

7 Video 1

8 Video 2 GAME

9 PC

Select “PC”

PC	Corresponding signals
	(p. 59)
	Displays
	PC screen
To return to TV	/

PC menu setting (change as desired)

Making settings “How to Use Menu Functions” to (p. 33)

Menu

Picture

	Item			Adjustments/Configurations (options)
		Reset to	Resets PC adjustments. Confirmation screen is displayed. Select “Yes” and press OK to
		defaults	reset.
		Sync	H & V:	The H and V sync signals are input from the HD/VD connector. (p. 58)
			On green: Uses a synchronized signal on the Video G signal, which is input from the
				G connector. (p. 58)
		Dot clock	Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is
			blurred.
			Adjusts the horizontal
		H-position	position.
PC		V-position	Adjusts the vertical position.
adjustments
			Alleviates the problem if the whole picture appears to flicker or is blurred.
			First adjust the Dot Clock to get the best possible picture, then adjust the
		Clock phase	Clock Phase so that a clear picture appears.

Note

It may not be possible to display a clear picture due to poor input signals.

Input	Switches to wide display.
	Input signal switched from 640×480 to 852×480
resolution
	Input signal switched from 1024×768 to 1280×768 or 1366×768
	Displays the H (Horizontal)/V (Vertical) frequencies.
H-frequency	Display range
V-frequency	Horizontal: 15	- 110 kHz
	Vertical: 48	- 120 Hz

32 Audio menu (p. 34)