Attaching the pedestal to TV
Accessories
Assembly screws |
| Bracket (1) | Cover (1) | Base (1) |
|
| TBL5ZA30091 | TBL5ZB30091 | TBL5ZX0252 (47 ”) |
|
|
|
| TBL5ZX0251 (55 ”) |
XSS5+15FNK | XYN4+F10FJK | XYN4+F10FNK |
|
|
(black) | (black) | (black) |
|
|
size (M5 x 15) (4) | size (M4 x 10) (4) | size (M4 x 10) (2) |
|
|
|
| (included with Cover) |
|
|
Two people are always required for attachment.
■Preparation for assembly
Unpack the pedestal and the TV, turn them so that their front surfaces face down, and put them on a blanket or such other cloth spread out on a workbench or desk.
Turn the front side of package to the workbench when unpacking the TV.
Choose a stable workbench that is larger than the TV and use a clean blanket or cloth that has no dirt or foreign matter on it.
Do not hold the LCD panel when holding the TV. 
Be careful not to scratch or damage the TV.
Attach the pedestal
■Assembling the pedestal
Attach the Bracket to the protrusion of Neck.
Make sure that the bracket is anchored before fixing the screws.
Fix securely with assembly screws 
(4 screws)
Protrusion of Neck (top)
Hold the
bracket A not to fall over
Bracket
FrontBase
Align the three tabs on the bracket with the grooves on the back of the TV and insert them.
tab
Check that the center tab is in the hole, and then slide in the bracket so that the arrow (↓) on the back of the TV is aligned with the arrow (↑) on the bracket.
Tighten assembly screws 
(total 4 screws) loosely at first, then tighten them firmly to fix securely.
Back of the TV
Attach the bracket cover
Attach the bracket cover and fix securely
with assembly screw | (total 2 screws). |
Tighten screws firmly. |
|
| Back of the TV |
| Cover |
Set the pedestal
●As shown in the figure, two people should hold the specified portions of the TV, raise and set up the TV.
Hold here
9