3Attaching the unit to the bracket.
While holding the unit with both hands, line up the unit just below the protruding sections on the bracket. Press the unit down about 4 to 5 mm so that the protrusions on the bracket fit into the holes on the bottom of the unit.
≥Do not use until you make sure that the unit is not loose and cannot be lifted upwards.
Line up the protruding | When correctly | click! |
sections here. | attached, | |
| you will hear a |
|
| locking sound. |
|
Diagram of attached bracket
Use the monitor in the open position as shown in the illustration to the right to prevent abnormal audio or damage resulting from vibrations in the car.
The angle of the monitor can be adjusted up to about 30o.
≥The angle of the monitor may shift while driving due to vibration, etc.
Enjoying in a car
≥Depending on the type of headrest, you may not be able to attach the bracket.
23cm or less
Releasing the unit from the bracket
1 |
2 |
Release |
button |
1Press the release buttons (left and right) in towards the center of the bracket.
2Lift the unit up to release it.
≥Do not press the release buttons any time other than when detaching the unit from the bracket.
21
RQT8248