Panasonic TX-26LXD600A FAQs, Data format for Card browsing, Sound, No sound or low volume

Created automatically

3-digit folder number + 5-digit arbitrary characters

4-digit arbitrary characters + 4-digit file number

•Usable characters: 1-byte "a to z", "A to Z", "0 to 9," and "_"

Created automatically

Created automatically

"PRL" + 3-digit arbitrary characters

Technical Information

	Data format for Card browsing
Photo	: Still images recorded with digital still cameras compatible with JPEG files of
	DCF∗ and EXIF standards
Video	: Videos recorded with this TV, Panasonic DVD recorder or digital camcorder
Data format	: FAT12 or FAT16

FAQs

Before requesting service or assistance, please follow these simple guides to resolve the problem.

If problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre for assistance. (p. 48)

Problem Actions

Number of pixels
for motion picture	: 320 x 240 (QVGA) or 176 x 144 (QCIF)
Max. number of files : 65,535
Image resolution	: 8 x 8 to 5,120 x 3,840
Sound format	: G.726 (32 Kbps, 8-kHz sampling frequency, monaural)

•Compliantadapter) card type (maximum capacity): SD Card (2 GB), Multi Media Card, miniSD Card (requiring miniSD

•Check the latest information on the card type at the following website. (English only) http://panasonic.co.jp/pavc/global/cs

∗DCF (Design rule for camera file system): Unified standard established by Japan Electronics and Information Technology Industries Association (JEITA).

Note

•A JPEG image modified with a PC cannot be displayed.

•Images imported from a PC must be compatible with EXIF (Exchangeable Image File) 2.0, 2.1, and 2.2.

•Partly degraded files might be displayed at a reduced resolution.

•MPEG4 view can only show moving pictures recorded by this TV, Panasonic DVD recorder DIGA or mobile camera D-snap.

•When recording in MPEG4, format the SD card with this TV. The card may not operate properly if formatted with different equipment.

•Memory cards must be formatted with FAT12 or FAT16 in order to be viewed on TV. If the card is not formatted, it may cause incompatibility with certain memory card adapters. If this happens, reformat the card using your digital camera.

Reformatting the card will erase the images and pictures stored in it. Refer to your camera manual for more information.

•This function cannot display Motion JPEG and still image not DCF formatted (i.e. TIFF, BMP).

•The displayed image size depends on the recorded image size.

Folder structure viewed in PC

Photo

DCIM

100_PANA

P1000001.JPG

P1000002.JPG

P1000003.JPG

P1000004.JPG

Video

SD_VIDEO

PRL001

MOL001.ASF	"MOL" + 3-digit arbitrary characters
MOL002.ASF
	•	Usable characters: 1-byte "a to f", "A to F", and "0 to 9"
MOL003.ASF
MOL004.ASF

•The folder and file names may be different depending on the digital camera used.

•Do not use two-byte characters or other special codes.

•The card may become unusable with this TV if file or folder names are changed.

White spots or shadow images (noise)

Chaotic image, noisy

	No image can be
	displayed
	Blurry or
Screen	distorted image
	(no sound or low volume)

Neither image nor sound is produced

The channel number is not disappeared on the screen

There may be red spots, blue spots, green spots and black spots on the screen

No sound is produced

Sound	Sound level is low
	or sound is distorted

•Check the position, direction, and connection of the aerial.

•Set "P-NR" in the Picture menu (to remove noise).

•(p. 18)

Check nearby electrical products (car, motorcycle, fluorescent lamp).

•Is "Colour" or "Contrast" in the Picture menu set to the minimum? (p. 18)

•Reset channels. (p. 22 and p. 24)

•Is the TV in "AV mode"?

•Is the mains lead plugged into the socket outlet?

•Is the TV turned On?

•Check Picture menu (p. 18) and volume.

•The channel number is being broadcast by the TV station. There is no way to turn this off.

•This is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel is built with very high precision technology giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of red, green, blue or black. Please note this does not affect the performance of your LCD.

•Is "Sound Mute" active? (p. 7)

•Is the volume set to the minimum?

•Sound signal reception may be deteriorated.

• •Frequently Asked Questions FAQs, etc. Technical Information

40 41