FAQs
Problem
TV takes so long to turn on
The channel cannot be changed
The channel cannot be selected
The remote control does not work
Other
TV goes into "Standby mode"
An error message appears
The LCD panel moves slightly when it is pushed with a finger
Clattered sound might be heard
Actions
•Like your computer, the TV has to run a number of diagnostic and software checks before it can display any broadcast channels.
•Is the TV in Teletext mode? (p. 16)
•Is the channel locked? (p. 24)
•Are the batteries installed correctly? (p. 6)
•Has the TV been switched On?
•The sleep function is activated.
•The TV enters "Standby mode" about 30 min. after broadcasting ends.
•Follow the message's instructions.
•If the problem persists, contact the authorized Service Centre.
•There are some looseness around the panel to prevent the damage to the panel.
The panel might move slightly when it is pushed with a finger, and clattered sound might be heard. This is not a malfunction.
SD Card: On screen messages
| Message | Meaning / Action |
|
| ||||
|
|
| •Insert a SD card. |
|
|
|
| |
| Is SD Card in? |
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
| •Unlock the SD card. |
|
|
|
| ||
| SD Card is locked |
|
|
|
|
| ||
| Please unlock to operate |
|
|
|
|
| ||
|
| •Unlock the file in the card. |
|
| ||||
| This file is locked |
|
|
| ||||
| Please unlock to operate |
|
|
| ||||
|
|
|
|
| ||||
| This type of format is not |
| The TV does not support the format. |
|
| |||
| supported |
| •(For the applicable formats and data, see p. 40.) |
|
| |||
|
|
|
|
| ||||
| This type of card is not |
| A card not supported by the TV has been inserted. |
|
| |||
| supported |
| •(For the supported cards, see p. 40.) |
|
| |||
|
| •The file is broken. |
|
|
|
| ||
| Broken file |
|
|
|
|
| ||
| Cannot display image |
|
|
|
|
| ||
|
| •The card memory is full. |
|
|
|
| ||
| Memory full |
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
| •The card does not have enough memory to operate. |
|
| ||||
| Not enough memory |
|
|
| ||||
|
|
|
|
| ||||
|
| •The file is not readable. |
|
|
|
| ||
| Cannot read file |
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
|
|
|
| ||||
| Unrecordable source |
| That channel cannot be recorded. (Recording is automatically |
|
| |||
| SD recording is stopped |
| •stopped.) |
|
|
|
| |
|
|
| • | |||||
| Error |
|
| |||||
| Check card |
|
| |||||
|
| That operation is not available during recording. | •SD Card: Onscreen FrequentlyAsked | |||||
| Card recording in progress |
| ||||||
| Please stop recording to operate |
| •To continue the operation, stop recording. | |||||
|
|
| (For example, changing channels while recording a TV | |||||
|
|
| programme.) |
|
| |||
|
|
|
| |||||
| Delete file? |
| Displayed when you press Red colour button to delete a | |||||
|
|
| •MPEG4 file. Press OK button to confirm deleting. | |||||
|
|
| ||||||
| No time data |
| Since the signal does not have the time information, the date is | |||||
| Cannot store time info |
| •recorded as 01/01/2000. |
|
|
| messages Questions | |
|
|
|
|
|
|
|
| |
| Cautions in handling SD Card : |
| ||||||
Do not remove the card while the TV is accessing data ("blue" LED |
|
|
| |||||
•On) (this can damage card or TV). |
|
|
|
|
|
| ||
|
|
|
|
|
| |||
Do not touch the pins on the back of the card. |
|
|
|
|
|
| ||
•Do not subject the card to a high pressure or impact. |
|
|
|
| ||||
•Insert the card in the correct direction (otherwise, card may be |
|
|
| FAQs,etc. | ||||
•damaged). |
|
|
|
|
| |||
Electrical interference, static electricity, or erroneous operation may |
|
|
| |||||
Blue LED |
| |||||||
•damage the data or card. |
|
|
|
|
| |||
|
| WARNING: As with an small object, |
| |||||
Back up the recorded data at regular intervals in case of deteriorated |
|
| ||||||
| SD card can be swallowed by young |
| ||||||
•or damaged data or erratic operation of the TV. (Panasonic is not |
| children. Do not allow children to |
| |||||
liable for any deterioration or damage of recorded data.) |
| handle SD card. Please remove SD card |
|
| ||||
|
|
|
|
| immediately after use. |
|
| |
44 | 45 |