Panasonic TX-26LX500A Setup menu, Clock, Pos Adjust the horizontal position, Sync, Freq. / V-freq

PC mode

Setup
During PC mode	MENU	Main menu
Press the MENU button.		Picture menu
Move to choose Setup menu.		Sound menu
Access Setup menu.	OK	Setup menu

Move to choose menu option.

Adjust chosen option or access chosen menu.

PC setup

Input resolution

Clock

H-pos

V-pos

Clock phase

Sync

EXIT

VGA

H & V

Press the EXIT button at any time to exit Setup menu.

PC setupAccess to adjust chosen option.

Input resolution : Displayed during VGA, WVGA, XGA, WXGA input signals.

Select WVGA or WXGA during WVGA or WXGA input signal to avoid noise. Select VGA or XGA during VGA or XGA input signal to avoid noise.

		Note:
		WVGA and WXGA signals may not be displayed properly.
Clock	: If a periodic striped pattern (noise) occurs, carry out adjustments to reduce the noise to the
		lowest level.

H-pos : Adjust the horizontal position.

V-pos : Adjust the vertical position.

Clock phase : Eliminate the flickering and distortion.

	Carry out this adjustment after adjusting Clock.
	Adjust to reduce noise to the most inconspicuous level.
Sync	: H & V - To synchronize by the horizontal and vertical signals from your PC.
	On G - To synchronize by the green signal from your PC (if available).

H-freq. / V-freq.

Displays the frequency of PC input signal.

If the input signal is not applicable, the characters will turn to red.

For applicable PC signals information see page 37.

Note:

H-FREQ. / V-FREQ. is displayed on the upper right of the screen during PC setup.

23