Problem | Check | Remedy |
Folder or file names are not dis- played in alphabetical order.
This is not a problem with the player.
The order of the folder and file names displayed on the Disc Navigator depends on the order in which the folders or files were recorded on the USB device.
Much time is required to recognized What is the USB device’s capacity? the USB device.
Some time may be required to load the data when large capacity USB devices are connected (this could take several minutes).
Power is not supplied to the USB | Is Err displayed on the front panel dis- | Turn the power off then back on. | |
device. | play? No power is supplied if the power |
| |
Turn the power off, then disconnect and reconnect | |||
| consumption is too high. | ||
| the USB device. | ||
|
| ||
|
|
| |
|
| Press DVD/USB to switch back to the DVD mode, | |
|
| then switch again to the USB mode. (When the | |
|
| input is switched back to the DVD mode, LOAd is | |
|
| displayed on the front panel display and the disc | |
|
| is recognized. When the input is switched back | |
|
| to USB, USb is displayed on the front panel display.) | |
|
| If the USB device is equipped with an AC adapter, | |
|
| use the USB device with the AC adapter connected. | |
Audio CD tracks cannot be recorded | Is there enough free space on the USB | Recording is not possible if there is not enough free | |
on a USB device. | device? | space left on the USB device. In this case, Available | |
|
| USB space is low is displayed. | |
| Are there 300 or more folders on the | Recording is not possible if the USB device con- | |
| USB device? | tains 300 or more folders. | |
|
|
| |
| Are there already 99 PIONEER folders | Recording is not possible if there are already 99 | |
| on the USB device? | PIONEER folders on the USB device. |
When connected to an HDMI-compatible device (DV-220KV-K only)
Problem | Check | Remedy |
Picture is not displayed. | Is the resolution properly set? | Set HDMI Resolution properly for the connected |
|
| device (page 15). |
|
| Restore HDMI Resolution to the default setting |
|
| (720x480p/720x576p) (page 15). |
| Is the HDMI cable properly connected? | Connect the cable securely (all the way in). |
|
|
|
|
| With some cables, 1 080p video signals will not be |
|
| output. |
Sound is not produced or is dis- torted.
Is HDMI Out properly set? | Set HDMI Out to LPCM (2CH) or Auto (page 14). |
Multichannel audio signals are not output.
Is HDMI Out properly set? | Set HDMI Out to Auto (page 14). |
Colors are not properly displayed on Is HDMI Color properly set? TV screen.
Change the HDMI Color setting (page 15).
20En