Picture menu, Pnr | Panasonic TX-23LX50A guide

Picture menu

Press the MENU button.

Move to choose Picture menu.

Move to choose menu option.

Adjust chosen option or access chosen menu.

1 2 3

4 5 6

7 8 9

TV/AV

Press the TV/AV button at any time to go back to watching TV.

Menu	Menu mode will be memorized for each TV, AV1 and
	AV2 mode.
	Dynamic / Standard / Cinema / Auto
	You can change the level of each Item (Backlight,
	Contrast, Brightness, Colour, Sharpness, NTSC-Tint,
	Colour temperature, AI and D.PNR) for each Menu
	(Dynamic, Standard, Cinema and Auto) according to
	your personal preference.
	Note:
	C.A.T.S. (page 10) is in effect when Menu mode is set
	to Auto.

Main menu

Increase or decrease the levels of these options according to your personal preference.

NTSC-Tint (Tint) The picture hue can be adjusted to suit your taste.

Notes:

•When the TV is receiving NTSC signals, NTSC-Tint is displayed and level adjustment is possible.

•When the TV is receiving YUV (60Hz) signals, Tint is displayed and level adjustment is possible.

Colour	Allows you to set the overall colour tone of the picture. Choose from Cool, Standard and
temperature	Warm.
AI	Automatically analyses the incoming picture and processes it to give improved contrast and
	optimum depth of field.
D.PNR	Reduces noise in a channel with many noises.
	Remains off when receiving a strong signal.
	Off:	Recommended mode when receiving a strong signal.
	Strong: Applies strong noise reductions regardless of input signals.
	Weak: Applies weak noise reductions regardless of input signals.
	Auto:	Automatically reduces unwanted picture noise.

Note:

By pressing the N button on the remote control while the Picture menu is displayed, the selected menu will be changed to the Normal mode.

Normalization will not occur if the menu is not displayed when the N button is pressed.

The Normal mode is the factory preset condition. Returning to this original condition is called “Normalization”.