Audio / Video connections
It is possible to connect a variety of additional equipment to this TV. The following pages detail how to connect external equipment to the rear of the TV.
Once your equipment is connected, use the following procedure to view the input:
Press the TV/AV button.
Whilst the on screen selector keys are displayed, press coloured buttons to select the AV source you wish to view.
Red button | : AV1 |
Green button | : AV2 |
The on screen selector keys that appear clear after a few seconds. If you want to select an input when the keys are not shown, press any coloured button and the keys will reappear.
Notes:
•You can also select an AV source using the TV/AV button on the top panel of the TV.
Press the TV/AV button repeatedly until you reach the AV source you wish to view.
•When a Monaural VCR is used, connect the Monaural Audio cable to the AUDIO L terminal.
•Additional equipment and cables shown are not supplied with this TV set.
TV/AV
OK
Red Green
1 2 3
4 5 6
7 8 9
0
AV1
AV1 | AV2 |
|
|
How to connect the Headphones terminal
M3 plug | (Not supplied) |
To bundle the cables with the clamper
1. Pull upward.
2. Put the cables and close.
Note:
Do not put the antenna cable and the power cord together to avoid noise.
7