Panasonic TX-22LT operating instructions Satellite, Receiver, RF connections

Quick start Guide

4. Q-Link connection of TV, VCR and Satellite using Scart and RF cables

LCD TV

Aerial

(Not Supplied)

Aerial Input socket

AV1	AV2
Scart socket	Scart socket
Aerial Input	TV
socket	Scart
	socket
	Satellite
	Receiver
Aerial	VCR
Output	Scart
socket	socket

For Q-Link to function correctly the TV, VCR and Satellite Receiver must be connected as shown in the diagram below.

RF connections

•Connect an RF cable to the Aerial In socket of the Satellite Receiver.

•Connect an RF cable from the RF Out socket of the Satellite Receiver to the RF In socket of the VCR.

•Connect an RF cable from the RF Out socket to the VCR of the TV Aerial In socket ().

Scart connections

‘Fully wired’ Scart Cables should be used for all of the Scart connections.

•The AV2 Scart of the VCR must be connected to the VCR socket of the Satellite Receiver.

•The TV Scart socket of the Satellite Receiver must be connected to the AV1 Scart socket of the TV.

Note:

If using a “Q-Link” VCR then the AV1 Scart of the VCR must be connected to the AV2 socket of the TV. If your VCR is not a “Q- Link” VCR, please consult your VCR operating instruction book.

AV2 AV1

Scart Scart

socket socket

Aerial Input socket

VCR

Aerial Output socket

Notes:

•Additional equipment and cables are not supplied.

•Further details of audio/ video connections can be found on pages 36 and 37.

•Further information for VCR and Satellite Receiver installation with this TV can be found on page 31.

8