Screen Display
•Off
•On
|
|
|
|
| ∗1 |
| |
| Balance |
| |
|
|
| |
|
|
|
|
| White |
|
|
|
| ||
|
|
| |
|
|
| Reset to |
|
|
| Defaults |
|
|
| Gamma |
| ∗1 |
| • S Curve / |
| Gamma |
| Reset to |
|
|
| 1.8 / 2.0 / 2.2 |
|
|
| / 2.4 / 2.6 |
|
|
| Defaults |
| Refresh Rate | ||
|
| • 50 Hz | |
|
| • 100 Hz | |
Settings | Resolution | ||
Enhancer | |||
|
| • Off | |
|
| • Mid | |
Advanced |
| • Max | |
Side Panel | |||
|
| • Off | |
|
| • Low | |
|
| • Mid | |
|
| • High | |
16:9 Overscan
•Off
•On
DVI Input Setting
•Normal
•Full
Pixel Orbiter
•Auto
•On
Scrolling Bar
Reset to Defaults
∗1 : PC input mode only
Turns the screen off when you select [Off]
•The sound is active even if the screen turns off.
•Press any buttons (except Standby) to turn the screen on.
•This function is effective in reducing power consumption when listening to the sound without watching the TV screen.
Adjusts the white balance of bright red area
Adjusts the white balance of bright green area
Adjusts the white balance of bright blue area
Adjusts the white balance of dark red area
Adjusts the white balance of dark green area
Adjusts the white balance of dark blue area
Press the OK button to reset to the default White Balance
Switches the gamma curve
•Please note the numerical values are reference for the adjustment.
Press the OK button to reset to the default Gamma
Changes the image processing of the panel (depending on the input signal)
•Set to [100Hz] normally
Enhance the picture resolution to make the image sharper
•You can set this function for each input.
•Not valid on Media Player
Increases the brightness of the side panel
•The recommended setting is [High] to prevent panel “image retention”.
[On]: Default - Image is overscanned by ~5% beyond the edge of the screen to hide edge video noise
[Off]: Displays image in its original size including edge video noise such as lines, dashes, dots etc.
•Applicable for video signals when TV aspect is set to [16:9]
•Memorised separately for SD and HD channels / signals
Changes the black level in the image for HDMI input mode with DVI input signal manually
•When the DVI input signal from the external equipment, especially from PC, is displayed, the black level may not be suitable. In this case, select [Full].
•The black level for HDMI input signal will be adjusted automatically.
•For HDMI input mode with DVI input signal only.
Selects the mode for wobbling of the image to prevent panel “image retention”
[Auto]: Automatically works only for the appropriate images and you rarely recognise the wobbling.
Scrolls the vertical bar to prevent panel “image retention”
•Press the OK button to start scrolling and press any buttons (except Standby) to exit this mode.
Press the OK button to reset settings of Picture Viewing Mode to the default.
How to Use the Menu Functions
23