Panasonic Setting Up the Encryption Key for TV Wireless LAN Connection

Setup the wireless LAN connection

Setup the wireless LAN connection to enable the network service functions.

•To setup the wireless LAN connection, the wireless LAN Adaptor is required.

•Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the manual of the access point.

•Please note that this TV does not support wireless public access points.

1	Connect the Wireless LAN Adaptor to the USB 1 or 2 port
	Internet environment
			Wireless LAN Adaptor
	Access point
2	Select [Yes]
	Start wireless LAN connection setup?		select
	Yes	No
	Please connect the wireless LAN adaptor to a USB terminal.		confirm
3	Select the connection type		select	•If your access point supports WPS (Push
	Please select network connection type.
	Connection Type			button), then select this option. If not,
	WPS(Push button)		confirm	select [Search for access point].
	Search for access point

■[WPS(Push button)]

WPS(Push button)				Press the WPS button on the access point until the light flashes.
	1) Pleasepresspressthethe‘WPS’‘WPS’buttonbuttontheon theaccessaccess			And then, press the OK button to connect the Wireless LAN
	point until its lightt flashes. .
	2) Whenthelightisisflashingselectselect‘Connect’‘Connect’ on TV.			Adaptor and the access point.
	TV.
	If youareunsure,pleasecheckcheckthetheinstruction
	manualoftheacaccesspointpoint. .
		Connect		•Ensure that your access point supports WPS for this method.
■ [Search for access point]				•WPS: Wi-Fi Protected Setup™
Access points found automatically are listed.
	No.	SSID	Wireless type Encrypt Reception	1 Select your desired access point
Available Access Points						•To search access points again	Y
					select
	2	Access Point B	11n(5GHz)
	3	Access Point C	11n(5GHz)
	1	Access Point A	11n(2.4GHz)
					access	•For the information of the INFO
						highlighted access point
Encryption Key Setting				2 Access the encryption key input mode

Connection will be made with the following settings:-

SSID : Access Point A

Authentication type : WPA-PSK

Encryption type : TKIP

Auto Tuning

Please input the encryption key.

Encryption key

Access Point Settings

Encryption key

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z

0

1

2

3

4

5

6

7

8

9

!

:

#

a

b

c

d

e

f

g

h

i

j

k

l

m

n

o

p

q

r

s

t

u

v

w

x

y

z

(

)

+

-

.

*

_

Access Point Settings

Encryption key is set to:-

XXXXXXXX

Select ‘Yes’ to confirm.

Select ‘No’ to change.

YesNo

•If the selected access point is not encrypted, the confirmation screen will be displayed. It is recommended to select the encrypted access point.

3 Enter the encryption key of the access point (Set characters one by one)

select	RETURN
Store

set

•You can set characters by using numeric buttons.

4 Select [Yes]

select set

•To re-enter the encryption key, select [No].

Wireless LAN connection setup is completed

•If failed, check the encryption key, settings or positions of your access point. Read the manual of the access point.

•If connection to the access point is successful, we recommend you perform the [Connection Test] (p. 46).

13