Panasonic TX-22LT2 manual Quick start Guide, Connection of TV and VCR using Scart and RF cables

Quick start Guide

2. Connection of TV and VCR using Scart and RF cables

LCD TV

Aerial

(Not Supplied)

Aerial Input socket

RF connection

Connect the AERIAL to the Aerial in socket of the VCR and an RF cable from the VCR Aerial Out socket to the TV Aerial socket ().

Scart Connections

The VCR can also be connected to the TV using a Scart cable if you are using a Scart equipped VCR.

•Use the TV’s AV1 Scart socket for a VCR.

•Use the TV’s AV2S Scart socket for an S-Video VCR.

AV1,AV2

Scart sockets

AV1

Aerial Output socket

Notes:

• Additional equipment and cables are not

supplied.

Aerial Lead

Scart socket

VCR

Aerial Input socket

• Further details of audio / video connections can

be found on pages 36 and 37.

3. Q-Link connection of TV and VCR using Scart and RF cables
	RF connection
LCD TV	Connect the AERIAL to the Aerial in socket of the
	VCR and on RF cable from the VCR Aerial Out
Aerial	socket to the TV Aerial socket (	).
(Not Supplied)	Scart connection
	The VCR must be connected to the AV2 Scart
	socket of this TV using a ‘fully wired’ Scart cable.
	Note:
	If using a “Q-Link” VCR then the AV1 Scart of the
Aerial Input socket	VCR must be connected to the AV2 socket of the
	TV. If your VCR is not a “Q-Link” VCR, please
	consult your VCR operating instruction book.

AV2

Scart socket

AV1

Aerial Output socket

Notes:

• Additional equipment and cables are not

supplied.

• Further details of audio/ video connections can

be found on page 36 and 37.

Aerial Lead

Scart socket

VCR

Aerial Input socket

• Further information for VCR and Satellite

Receiver installation with this TV can be found

on page 31.

7