Panasonic TQBC2206 warranty Menu list, Menu Adjustments / Configurations alternatives

(p. 28-29 and p. 31)

•A different menu will be displayed while PC, DVI to HDMI adapter cable or SD Card is used.

•Only available items can be selected.

Displays the system information of this TV

System Information

Displays the software licence information

Refresh Rate Software Licence

(Auto / Off / +1/2 Hr / +1 Hr) (p. 23)

•Set to “Auto” normally

Changes the image processing of the panel (depending on the input signal) (50Hz / 100Hz)

•Set to “100Hz” normally

Daylight Saving Time

Select time offset from the standard time for Summer Time

Region Select

Lights blue LED while SD Card is inserted (Off / On) (p. 31)

Selects the region where you live to adjust the standard time (NSW/ACT / Victoria /

Queensland / South Australia / Western Australia / Northern Territory / Tasmania) (p. 23)

SD Card LED

How to Use Menu Functions

■Menu list

Menu	Item		Adjustments / Configurations (alternatives)
VIERA	VIERA Link Control	“Speaker control” (p. 33)
		Controls the connected Panasonic equipment
		“Easy control only with VIERA remote control” (p. 33)
Link		You can also access VIERA Link Menu directly using the VIERA Link button on the
	Speaker Selection	•remote control.
	Viewing Mode	Basic picture mode (Dynamic / Normal / Cinema / Auto)
		•Set for each input signal
	Contrast, Brightness,	Adjusts colour, brightness, etc. for each picture mode to suit your taste
	Colour, Sharpness
	Tint	Adjusts tint of image
		•For NTSC signal reception only
Picture	Colour Balance	Chooses the colour balance of the entire image (Cool / Normal / Warm)
		Automatically adjusts colours to vivid ones (Off / On)
	Colour Management	•Not valid on PC signal
	P-NR	Picture Noise Reduction
		Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)
		•Not valid on HDMI, PC signal or DVB
	MPEG NR	Automatically reduces picture noise of digital signals and flicker noise in the contoured
		parts of a picture (Off / Min / Mid / Max)
		Automatically makes still pictures and slow pictures look more vivid (Off / On)
	3D-COMB	For PAL or NTSC signal reception only
		•Not valid on S-Video, components, PC, HDMI and SD Card
		••Cannot be used with DVB
	Reset Picture Defaults	Press the OK button to reset the present Picture Mode to the default settings
	Mode	Basic sound mode (Music / Speech)
	Bass	Adjusts the output level of deep bass
	Treble	Adjusts the output level of high-pitch, shrill sound
	Balance	Adjusts volume level of right and left speakers
	Headphone Volume	Adjusts the volume of the headphones
		Surround sound settings (Off / Simulated Surround / SRS TruSurround XT)
		Simulated Surround: Provides a dynamic enhancer to simulate improved spatial effects
	Surround	SRS TruSurround XT: SRS TruSurround XT® creates a high quality surround sound effect
			using just two speakers from the source which can output surround
			encoded signals
	Volume Correction	•Switching is also possible by the Surround button on the remote control (p. 7)
		Adjusts volume of individual channel or input mode
		Selects the initial setting for Audio tracks (Dolby Digital / MPEG)
		If programme has both Dolby Digital and MPEG audio tracks, priority is given to what you select
Sound	DVB Audio	Dolby Digital : A method of coding digital signals developed by Dolby Laboratories. Apart
		•DVB mode only
	Preference	MPEG :	An audio compression method that compresses audio to small size
			without any considerable loss of audio quality.
		Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
	SPDIF Selection	terminal (Auto / PCM)
		Auto: Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as PCM.
		PCM: Dolby Digital is output as PCM. MPEG is output as PCM.
		•DVB mode and Movie View Mode (p. 31) only
		Normally, MPEG sound is larger than Dolby Digital one
	MPEG Audio Level	You can adjust the audio level of MPEG as the initial setting
		0dB to -12dB in -2dB reductions
		••DVB mode only
		Select to fit the input signal (Auto / Digital / Analogue) (p. 29)
		Auto	: Automatic detection of digital or analogue sound source
	HDMI1 / 3 Input	Digital	: HDMI cable connection
		Analogue : HDMI-DVI adapter cable connection
		HDMI input mode only
		•HDMI2 terminal is for digital signal only
	Reset Sound Defaults	••No setting for HDMI2 available
		Press the OK button to reset the present Sound Mode to the default settings

■Menu list

Menu		Item	Adjustments / Configurations (alternatives)
	DVB Favourites Edit		Creates list of favourite programmes (p. 23)
		Auto Tuning	Automatically sets the channels received in the area (p. 24)
		Analogue	Edits analogue channels (p. 25)
		Programme Edit
	Tuning	DVB Manual	Sets the DVB channels manually (p. 25)
		Tuning
		Analogue	Sets the analogue channels manually (p. 25)
	Menu	Manual Tuning
		Add New DVB	Adds new DVB services (p. 25)
		Services
		New Service	Selects whether to give a notification message when a new DVB service is found (p. 25)
		Message
		DVB Signal	Checks the DVB signal condition (p. 25)
		Display
	Off Timer		Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
	Teletext		Teletext display mode (TOP (FASTEXT) / List) (p. 16)
	Shipping Condition		Resets all settings, for example, when moving house (p. 26)
	System Update		Downloads new software to TV (p. 23)
	Power Save		Reduces brightness of picture to economise on power consumption (Off / On)
	Side Panel		Increases the brightness of the side panel (Off / Low / Mid / High)
Setup			•The recommended setting is “High” to prevent panel “image retention”
			Selects the screen area displaying the image (Off / On)
			On : Enlarged the image to hide the edge of the image.
	Picture Overscan		Off : Displayed the image in the original size.
			Set to “On” if noise is generated on the edge of the screen.
			•This function is available when aspect is set to 16:9.
			••1080i or 1080p signal only
	Input Labels		Labels or skips each input terminals (p. 27)
	Banner Display		Sets how long the information banner (p. 11) stays on screen
	Timeout		•0 (No display) to 10 sec. in 1-sec. increments
	VIERA Link	VIERA Link	Sets to use VIERA Link functions (Off / On) (p. 32)
		Power off Link	Set to “Set” to use Power off Link function (No / Set) (p. 33)
	Settings
		Power on Link	Set to “Set” to use Power on Link function (No / Set) (p. 33)

•How to Use Menu Functions (picture, sound quality, etc.)

Advanced

20 21