Panasonic TQBC2033 manual Advanced PIP, Sub screen, Main screen

Advanced PIP

1

2

3

4

Press to display the Setup menu.

Press to select “OSD Language”.

Press and hold until the Options menu is displayed.

Press to select Advanced PIP.

		Options				1/2
		Off-timer function		Enable
5	Press to adjust the menu.	Onscreen display			On
		Initial INPUT			Off
	Off : Sets normal two screen display mode
		Initial VOL level	Off			0

	(see page 21).		Maximum VOL level	Off	0
			INPUT lock		Off
	On : Sets Advanced PIP mode.
			Studio W/B		Off
	Press to confirm.		Advanced PIP		Off
			Display size		Off
6	One screen	Advanced PIP
	Press to exit from
	Options menu.
	Sub screen		Main screen

Notes:

•Advanced PIP corresponding signal

Sub screen

NTSC, PAL, SECAM (tuner, video)

525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1250/50i (Component Video, RGB, DVI, SDI, HDMI)

Main screen

640x480@60Hz, 852x480@60Hz, 1024x768@60Hz, 1366x768@60Hz (RGB, DVI, HDMI)

1280x768@60Hz (DVI)

•Sound output is from the picture which is selected in Audio OUT (PIP) (See page 25).

•In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.

•The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed on the main picture and depending on the 2-picture display mode.

•Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.

•Computer screen picture is displayed in a simplified format, and it may not be possible to discern details on them satisfactorily.

•Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.

22