Panasonic TH-P65VT30P, TH-P65VT30K, TH-P65VT30D, TH-P65VT30M, TH-P65VT30T Network

Problem

Actions

•Set the sound setting of the connected equipment to “2ch L.PCM”.

Sound is unusual

•Check the [HDMI1 / 2 / 3 / 4 Input] setting in the Sound Menu.

(p. 39)

•If digital sound connection has a problem, select analogue sound

connection. (p. 77)

Pictures from external

•Check the HDMI cable is connected properly.

(p. 68, 74 - 75)

equipment are unusual

•Turn the TV and equipment Off, then turn them On again.

when the equipment is

•Check an input signal from the equipment.

(p. 78)

connected via HDMI

•Use equipment compliant with EIA/CEA-861/861D.

•Check the LAN cable or Wireless LAN Adaptor is connected properly.

Cannot connect to the

(p. 59)

(p. 59 - 63)

•Check the connections and settings.

network

•Check the network equipment and network environment.

•If the problem persists, consult your Internet Service Provider or

telecommunications company.

Cannot select the

•Is the media server prepared?

(p. 58)

file during DLNA

operations

•Check applicable data format.

(p. 80 - 82)

Cannot operate

•Check the connections and settings.

(p. 59 - 63)

VIERA Connect

•The server or connected line might be busy now.

•Has the 3D Eyewear been switched On?

(p. 30)

•Ensure that [3D Mode Selection] is set to [3D].

•Some 3D image signals may not be automatically recognised as

3D images. Set [3D Mode Selection (Manual)] to match the picture

format. (p. 30)

•Check that there are no obstacles between the infrared sensors on

Cannot see 3D images

the TV and the 3D Eyewear. If the 3D Eyewear stops receiving the

infrared signal for about 5 minutes, the 3D Eyewear will be turned off

automatically.

•Check the available area to use the 3D Eyewear.

(p. 29)

•Depending on the person, the 3D images may be difficult to see,

or cannot be seen, especially in users that have a different level of

eyesight between the left and right eyes.

Take the necessary steps (wearing glasses etc.) to correct your

eyesight before use.

•Check that there are no obstacles between the infrared sensors on

3D Eyewear is turned

the TV and the 3D Eyewear or that the 3D Eyewear is placed inside

the coverage area (p. 29). If the 3D Eyewear stops receiving the

off automatically

infrared signal for about 5 minutes, the 3D Eyewear will be turned off

automatically.

There is something

•Check the setting of [Picture Sequence] or [Edge Smoother].

wrong with the

3D images

(p. 31)

The indicator lamp

does not light

•The battery may be running low or flat. Charge it.

when pressing the

power button on the

3D Eyewear