Selecting the input signal
Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display.
Input signals will change as follows:
VIDEO S-VIDEO COMPONENT PC
VIDEO: Video input terminal in INPUT1.
COMPONENT: Component or RGB input terminal in INPUT3.
PC: PC input terminal in INPUT4.
Notes:
•Selecting is also possible by pressing the INPUT button on the unit.
•The sound set with “AUDIO INPUT SELECT” is output.
•Select to match the signals from the source connected to the component/RGB input terminals.
•In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
•Image retention (image lag) may occur on the plasma display panel when a still picture is kept on the panel for an extended period. The function that darkens the screen slightly is activated to prevent image retention, but this function is not the perfect solution to image retention.
INPUT MENU 
+/
ENTER/ 
14