Panasonic TQB2AA0756 EZ SyncTM Connections, Connecting this unit to a DVD recorder and AV amp

Page 41

EZ SyncTM Connections

Follow the connection diagrams below for HDAVI control of

 

If connection (or setting) of equipment compatible with HDAVI

a single AV piece of equipment such as a Panasonic DIGA-

 

control is changed, switch the power of this unit Off then On

DVD recorder, RAM theater, or Player theater system.

 

again while the power of all equipment is On (so that the

Refer to page 30-31 for Setup Menu settings and additional

 

unit can correctly recognize the connected equipment) and

control information.

 

check that DIGA, RAM theater, and Player theater playback

Optional HDMI and/or optical cables are not provided.

 

operate.

Note

•HDMI 1 is recommended.

When connecting to HDMI 2, set the input mode to HDMI 2 (p. 24) initially before connecting to HDMI 2. After connection, confirm the HDMI control functions (p. 30-31).

■Connecting this unit to the DIGA, RAM theater, or Player

theater

•For DIGA: Connect with HDMI cable

•For RAM theater and Player theater: Connect with the HDMI and audio cables.

If audio cable is not connected, you cannot listen to the TV program through the theater system.

■Connecting this unit to a DVD recorder and AV amp

When using an “EZ Sync” audio-video amplifier and a compatible DIGA recorder, use a daisy chain connection as shown below.

Back of the TV

INPUT

R L

INPUT 1

R L

INPUT 2

 

R

L

 

 

PROG TO

 

 

AUDIO

 

OUT AMP

R

L

 

 

AUDIO

PR

PB

Y

 

 

 

 

HDMI 2

 

 

 

AUDIO IN

 

 

AV IN 1

AV IN 2

 

 

or

 

 

S VIDEO

 

 

VIDEO

HDMI 1

 

 

AUDIO IN R

L DIGITAL

Digital Audio

 

 

AUDIO OUT

out

 

 

 

Recommended AV Connections

or or

HDMI cable

HDMI (AV OUT)

AUDIO

HDMI

HDMI

HDMI

HDMI

IN

(AV OUT)

(AV OUT)

(AV IN)

(AV OUT)

or

Panasonic RAM theater /

DIGA

Panasonic

DIGA

Panasonic AV amp

Panasonic Player theater

(Panasonic DVD Recorder)

HD Camcorder

(Panasonic DVD Recorder)

 

•One AV amp and one DIGA recorder can be operated with this unit.

•Be sure to connect the AV amp between this unit and the DIGA recorder.

■Setting of this unit after connection

After making connections as shown above, set “EZ Sync” (under “EZ Sync setting”) to “On” using the Setup menu. (p. 30-31).

Note

•Individual components of HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals.

•When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio.

(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)

Advanced

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents VIEW-PTV Model No. Número de modeloTurn your own living room into a movie theater Experience an amazing level of multimedia excitementContents Important Safety Instructions Safety PrecautionsAC Power Supply Cord Set upIf problems occur during use When using the Plasma TVAccessories Accessories/Optional AccessoryOptional Accessory Installing remote’s batteriesSet-up Assembling the pedestalAttaching the pedestal to TV Bottom viewTo Prevent TV from Falling Over AccessoriesSecuring to a base TV must be fastened to both a base and a wallSecuring to a wall Fix to wall or post with strong commercial wire or chainReference of connection Before ConnectionBasic Connection If using Cable Box Set the TV channel to CH3 or CH4Example Cable BoxTo connect antenna terminals Example 2 Connecting DVD recorder VCR To record/playbackBack of the TV AC CordStandard-Definition HighTo use Hdmi terminals To use Component terminalsDVD Recorder Satellite Connecting TV and DVD recorder VCRDVD Recorder or VCR Connect in the same way as on pYellow ReceiverTo use S Video terminals Cable Binding Instructions Example 4 Connecting Home Theater and DVD recorderTo connect Hdmi terminals Front of the TV Back of the TV Equipment selection button p Changes the input mode pIdentifying Controls Turn the TV On with the Power button First Time SetupAdjust the clock Select your languageConfirm registered channels Auto channel setupPress to exit from menu screen Listen with SAP Secondary Audio Program Watching TVDisplay Information RecallRatio Change AspectCall up FavoriteInsert the SD Card Viewing from SD CardDisplay menu Select Memory card Select the data to be viewedTo adjust picture To watch photos in Slide show modeViewing from a GalleryPlayer SD Card ViewWatching Videos and DVDs Select the remote control modeInput Select For other operations, see pOperate EZ SyncTMDisplay EZ Sync menu Select the equipment Adjust or select How to Use Menu FunctionsDisplay menu MenuAV mode, the Audio menu and Setup menu give fewer options Adjustments/Configurations alternativesBasic picture mode Vivid/Standard/Cinema/Custom p Speaker outputDisplay Sub Menu Select SetupSelect the item Sub menu listSet/No Comp.1/Comp.2/HDMI 1/HDMI 2/Video 1/Video 2/VideoSelect EZ Sync setting Display menu Select SetupEZ SyncTM Hdavi ControlTM Select EZ SyncAvailable TV’s remote control buttons Press Select the equipment you want to accessPress Select Speaker output Select Home theater or TV You can select availableLock Lock PasswordGame lock Program lockEditing and Setting Channels To cancel the Edit Select scanning mode p Select AutoSelect Edit Select the item to be editedInput Labels/Monitor Out Display menu Select SetupSelect External devices or CC External devicesClosed Caption To reset the settingsSelect the terminal and label of the external equipment Select the item and setDisplay menu Select Timer Using TimerSelect the timer to set Set the timerWhen the correct code is found Power Off the external equipmentPress both buttons simultaneously for More than 3 secondsDVD Player CamcorderConnect with Hdmi cableSetting of this unit after connection Connecting this unit to a DVD recorder and AV ampEZ SyncTM Connections Hdmi cableRemote Control Operation List Remote Control Operation/Code ListRemote Control Operation/Code Remote Control Code ListRemote Control Operation/Code List Remote Control Operation/Code List FAQs, etc C8+ Ratings List for LockTV-14 Technical Information To reset the aspect ratioClosed Caption CC Aspect RatioMessage Data format for SD Card browsingSD Card warning messages Meaning GalleryPlayer warning messagesPicture mode Input signals that can be displayedEZ SyncTM Hdavi ControlTM Hdmi connectionFirst, unplug the Power cord plug from the wall outlet MaintenanceDisplay panel CabinetSpecifications Check the position, direction, and connection of the aerial Intermittent soundDisplayed One spot remains dark Chaotic image, noisyBlack Box appears No sound is produced SoundLimited Warranty Coverage Limited Warranty for U.S.AIn-Home or Carry-in Service Limited Warranty Limits And ExclusionsAccessory Purchases Customer Services DirectoryService in Puerto Rico Npcparts@us.panasonic.comPanasonic Canada Inc Limited Warranty for CanadaLimited Warranty for Canada Page Page Page Page Anotación del cliente Customer’s RecordDivision of Panasonic Corporation North America
Top Page Image Contents