Panasonic TQB2AA0756 Assembling the pedestal, Set-up, Attaching the pedestal to TV, Bottom view

■Assembling the pedestal	Attaching the pedestal to TV
Installing the poles		Securing the poles
For 42˝,50˝ Plasma		Base
television (Outside)
	Pole	Front
Base
Pole
		A

Quick

Insert the poles into the left and right holes in the underside of the base so that they fit securely as shown in the illustration above.

■Set-up

•Carry out work on a horizontal and level surface.

Use the assembly A screws to secure the poles firmly to the bottom of the base.

Note

Forcing the assembly screws the wrong way will strip the threads.

Start Guide

Bottom view

Accessories

Assembly screw (4 of each)

B	Rear side	A
		M5 x 20
		B
		M5 x 30
	Hole for pedestal
	installation	Pole (2)
Arrow mark	Pole
		Base (1)
Pole	Fix securely with assembly
Base	•screws B .
Label	(Total 4 screws)

Warning

Do not disassemble or modify the pedestal.

•Otherwise the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any television or displays other than those given in this Operating Instructions.

•Otherwise the TV may fall over and become damaged, and personal injury may result.

•If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.Do not use the pedestal if it becomes warped or physically damaged.

•If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.During set-up, make sure that all screws are securely tightened.

•If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury may result.Use the accessory fall-prevention brackets to secure the TV.

Accessories/Optional Accessory

7