3.4 - Assembling the player.
Assembling the player is done using the following procedure:
ÊUse the four screws to attach the mechanism.
ËPress the cables from the frontpanel into their sockets.
Ì Attach the front of the player again. Then ensure all snap- locks.
• Put the topcover back on and secure it.
• Refit the frontpanel of the tray.
3.5 - Finishing up the installation.
After turning the player on and off the KeyMaster is ready for use. The player and the KeyMaster is now ready for use. For details about programming the KeyMaster look in the operating instructi- ons.
Remember to test the player in both region 1 & 2.
Enjoy our product, the KeyMaster!