Panasonic DMP-BD75 manual TV / Device Connection, Network

TV / Device Connection

TV Aspect

Set to match the type of television connected.

When connected to a 4:3 aspect television and playing 16:9 ratio image:

	The sides are cut off so
	the picture fills the
4:3 Pan &	screen. When playing
Scan	BD-Video, video is
	output as “4:3
	Letterbox”.
4:3	Black bands appear at
	the top and bottom of the
Letterbox	picture.

When connected to a 16:9 widescreen television and playing 4:3 ratio image:

16:9	Video is displayed as a 4:3 ratio image in
	the centre of the screen.
16:9 full	Video is displayed as a horizontally
	stretched 16:9 image.

HDMI Connection

Press [OK] to show the following settings:

HDMI Video Format

The items supported by the connected devices are indicated on the screen as “¢”. When any item without “¢” is selected, the images may be distorted.

≥If “Automatic” is selected, automatically selects the output resolution best suited to the connected television.

≥To enjoy high-definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition Television). If this unit is connected to an HDTV through other equipment, the other must also be 1080p compatible.

24p Output

When this unit is connected to a TV supporting 1080/24p output using an HDMI cable, movies and other material recorded at 24p are output at 24p.

≥When BD-Video images other than 24p are played, images are output at 60p.

≥24p :

A progressive image recorded at a rate of 24 frames per second (motion-picture film). Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials.

HDMI Audio Output

This setting selects whether or not to output audio from HDMI.

VIERA Link

Set to use “HDAVI Control” function when connected with an HDMI cable to a device that supports “HDAVI Control”.

≥Select “Off” when you do not want to use “HDAVI Control”.

Deep Colour Output

This setting is for selecting whether to use Deep Colour Output when a television that supports Deep Colour is connected.

Contents Type Flag

Depending on the playback content, the TV will output adjusting to the optimal method when a TV that supports this function is connected.

TV System

Perform the setup so it matches the TV System of the connected TV.

≥When NTSC contents are played, they are outputted in the signal format specified in the “NTSC Contents Output”, irrespective of the settings here.

Network

Network Easy Setting (￿ 11)

Network Settings

Perform network-related settings individually. Press [OK] to show the following settings:

IP Address / DNS Settings

This is for checking the state of the network connection and setting the IP address and DNS-related.

Press [OK] to show the respective setting.

≥“Connection Speed Setting” is enabled only when “Connection Speed Auto-Config” is turned “Off”.

Proxy Server Settings

This is for checking the state of connection with the Proxy server and performing settings.

Press [OK] to show the respective setting.

MAC Address

Displays the MAC address of this unit.

26 VQT3B11