Panasonic DMP-BD75 manual Safety precautions, Unit, AC mains lead, Placement, Batteries

Safety precautions

WARNING

Unit

≥To reduce the risk of fire, electric shock or product damage,

–Do not expose this unit to rain, moisture, dripping or splashing.

–Do not place objects filled with liquids, such as vases, on this unit.

–Use only the recommended accessories.

–Do not remove covers.

–Do not repair this unit by yourself. Refer servicing to qualified service personnel.

–Do not let metal objects fall inside this unit.

–Do not place heavy items on this unit.

AC mains lead

≥To reduce the risk of fire, electric shock or product damage,

–Ensure that the power supply voltage corresponds to the voltage printed on this unit.

–Insert the mains plug fully into the socket outlet.

–Do not pull, bend, or place heavy items on the lead.

–Do not handle the plug with wet hands.

–Hold onto the mains plug body when disconnecting the plug.

–Do not use a damaged mains plug or socket outlet.

≥Install this unit so that the AC mains lead can be unplugged from the socket outlet immediately if any problem occurs.

CAUTION

Unit

≥This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

≥Do not place sources of naked flames, such as lighted candles, on this unit.

≥This unit may receive radio interference caused by mobile telephones during use. If such interference occurs, please increase separation between this unit and the mobile telephone.

[For[Australia[and[New[Zealand]

≥This unit is intended for use in moderate climates.

[For]Asia,]Middle]East]and]India]

≥This unit is intended for use in tropical climates.

Placement

≥Place this unit on an even surface.

≥To reduce the risk of fire, electric shock or product damage,

–Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated.

–Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.

–Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration.

Batteries

≥Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.

≥Mishandling of batteries can cause electrolyte leakage and may cause a fire.

–Do not mix old and new batteries or different types at the same time.

–Do not heat or expose to flame.

–Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

–Do not take apart or short circuit.

–Do not recharge alkaline or manganese batteries.

–Do not use batteries if the covering has been peeled off.

–Remove batteries if you do not intend to use the remote control for a long period of time. Store in a cool, dark place.

≥When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

Caution for AC Mains Lead

(For Saudi Arabia)		started
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains		Getting
Should the fuse need to be replaced please ensure that the
plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
replacement fuse has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the body
of the fuse.
If the plug contains a removable fuse cover you must ensure
that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a		settings
dealer.
replacement cover is obtained.
A replacement fuse cover can be purchased from your local
		and
	CAUTION!
	IF THE FITTED MOULDED PLUG IS UNSUITABLE	Connections
	SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
	FOR THE SOCKET OUTLET IN YOUR HOME THEN
	THE FUSE SHOULD BE REMOVED AND THE PLUG
	CUT OFF AND DISPOSED OF SAFELY.
	THERE IS A DANGER OF SEVERE ELECTRICAL
	ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring code
as stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the
following code:		Playback
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal
which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the
terminal which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E, BY THE EARTH SYMBOL Ó OR COLOURED
GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Before use
Remove the connector cover.		Settings
How to replace the fuse
The location of the fuse differ according to the type of AC
mains plug (figures A and B). Confirm the AC mains plug
fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.

Figure A Figure B

Fuse cover

2. Replace the fuse and close or attach the fuse cover.				Reference
Figure A	Fuse	Figure B	Fuse
			(5 ampere)
	(5 ampere)

VQT3B11 3