Still Mode paused video, Seamless Play | Panasonic DMP-B200 specification

Video

Still Mode ( paused video )

[BD-V] [AVCHD] [DVD-V]

Select the type of picture shown when you pause playback (> 40, “Frames and fields”).

!Auto:

Automatically selects the type of picture shown.

!Field:

Select if jittering occurs when “Auto” is selected. (The picture is coarser.)

!Frame:

Select if small text or fine patterns cannot be seen clearly when “Auto” is selected.

(The picture is clearer and finer.)

Seamless Play

[DVD-VR]

Select the play mode between playlist chapter segments and partially deleted titles.

!On:

The chapters in playlists are played seamlessly. This does not work while searching or when there are several audio types included on the playlist. Additionally, the positioning of chapter segments may change slightly.

!Off:

The points where chapters in playlists change are played accurately, but the picture may freeze for a moment.

Audio

Dynamic Range Compression

[BD-V] [AVCHD] [DVD-V] [MKV]

You can listen at low volumes but still hear dialog clearly. (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

≥“Auto” is effective only when playing Dolby TrueHD.

! On

! Off

! Auto

Digital Audio Output

Press [OK] to show the following settings.

≥For details on digital output (> 30)

Dolby D/Dolby D +/Dolby TrueHD

DTS

Select whether Dolby Digital, Dolby Digital Plus, Dolby TrueHD or DTS Digital Surround is output in “Bitstream” or “PCM” format.

≥Not making the proper settings may result in noise.

≥If the unit is connected with the HDMI AV OUT terminal, the specifications of the connected equipment take precedence over this unit and audio selected in these

items may not be output (e.g., when a television is connected, the HDMI audio output of this unit is limited to down-mixed 2ch.)

!Bitstream:

Select “Bitstream” when the connected equipment can decode the respective audio format.

jConnect equipment supporting HDMI (High Bit rate Audio) and use a High Speed HDMI Cable in order to output high bit rate audio such as Dolby Digital Plus or Dolby TrueHD.

!PCM:

Select “PCM” when the connected equipment cannot

decode the respective audio format.

Refer to the operating instructions for connected devices to verify whether or not they can decode each of the audio formats.

BD-Video Secondary Audio

[BD-V]

Turn on/off the button click sound on the menu and audio with secondary video in picture-in-picture mode. (> 17)

!On:

The primary audio and secondary audio are mixed and output. The sampling frequency is converted to 48 kHz.

!Off:

The button click sound on the menu and secondary audio are not output.

Settings

VQT3C15