Preventing the TV from falling over
This TV could fall over if it's pushed, pulled or knocked down.
We therefore recommend the TV is secured to the base as illustrated.
●This measure is designed to reduce the risk of injury from a falling TV. However, it cannot guarantee protection in all cases.
Fall-prevention parts
Band | Clamp | Screw | Wood screw |
●TKLA4301 | ●TKL3DA0101 |
|
|
Securing to a base
Fix pedestal and base together with band. | Screw |
| Band |
Clamp | Wood screw |
This image is for illustrative purposes only.
Identifying Controls
TV
Quick Start | Guide |
|
|
/ Options | IdentifyingControls |
SD card slot 
PC terminal 
AV4 terminals 
Headphone 
jack
Mains power On / Off
●Switch On to turn on the TV or turn the TV to standby mode by the remote control
Function Select
●Volume / Contrast / Brightness / Colour / Sharpness / Tint (NTSC mode) / Bass / Treble / Balance / “Digital TV Auto Tuning” or “Analogue TV Auto Tuning” (p. 24 - 25)
Change the channel up/down. When
a function is displayed, press up/down
to adjust the setting of the selected
function. When in standby mode, switches TV on.
Change the input mode
Remote control signal receiver
●Do not place any objects between the TV remote control signal receiver and remote control.
Power LED ●Standby: red On: green
●When using the remote control, indicates the TV has received a command.
C.A.T.S. (Contrast Automatic Tracking System) sensor ●Senses brightness to adjust picture quality when “Eco Mode”
in the Picture Menu is set to “On” (p. 24)
Accessories |
9