Panasonic TC-P54G20, TC-P50G20 quick start DNS settings Manual setting

(continued)

[IP setting]
Select “IP setting mode” and set to	Manual setting
“Automatic”	Select “IP setting mode” and set to “Manual”
(When IP automatic acquisition in DHCP can be used)	Select the item and press OK

Menu	IP address/DNS settings	1/2	select	Check the specifications of the broadband router
	IP setting mode	Automatic		and enter each IP address
	IP address	192.168.0.5
	Subnet mask	255.255.255.0	OK	Subnet mask	0 .	0 .	0 .	0
	Default gateway	192.168.0.254

or	change
The acquired address is displayed.	channel
	OK

Each IP address is acquired automatically

[DNS settings]							Manual setting
		Select “DNS setting mode” and set to “Automatic”
(When DNS automatic acquisition in DHCP can be used)							Select “DNS setting mode” and set to “Manual”
	Menu		IP address/DNS settings	1/2	select		Select the item and press OK
			IP setting mode	Manual			Enter each IP address as was specified by the
			Default gateway	192Automatic.168.0.254
			DNS setting mode	Automatic	OK		provider
			Primary DNS	192.168.0.20
			Secondary DNS	192.168.0.21		Primary DNS		0	. 0 . 0 .	0

The acquired address is displayed.

	Each IP address is acquired automatically							or	select
If you are using a broadband router, IP automatic acquisition in DHCP can be									OK
used under normal circumstances. If you are not sure, check with the person
who installed the equipment, or check the instructions for each device.
Set only if specified by the provider.
It is not required for normal household use.
	Proxy address							Proxy port
	This is the address of the relay server that is connected to the target							This number is specified by the provider together with
	server instead of the browser and sends data to the browser.							the Proxy address.
	Setting is only required if specified by the provider.							Select “Proxy port” and press OK
		Select “Proxy address” and press OK
								Enter the Port number
	Menu		VIERA CAST setting		select
			Proxy address		OK			Proxy port	0
			Proxy port	0
								or	select
			Allows manual entry of proxy address for
									OK
			relay server. (normally not required)
		Enter address
		(see “Entering characters” on p. 19)					If you perform the Proxy settings, it may make it
	Proxy address						impossible to view VIERA CAST movie content.
	prIo
		Select “OK”
	Select “Software update”				select		Press OK to start the Software update screen
	Menu		Connection test				Follow directions on the screen
			Network settings
			Network connection	Wireless (WiFi)		* Set “Clock” first. (p. 17)
			IP address/DNS	settings	OK
			VIERA CAST setting
			Software update
			Mac address	00-0b-97-7c-65-e9

Check if software update for the TV is available.

Network Settings

Advanced

The Network settings become effective when you close the menu and run “Connection test”. 43