Panasonic TC-P50U50 Display the Input select menu Select the input mode, Set Sleep Timer

Set Sleep Timer

The TV automatically goes into Standby after the selected period.

■Press SLEEP repeatedly until the desired time appears.

SLEEP

30

• Off/15/30/60/90 (minutes)

Note

•It is also possible to set the time from “Sleep Timer” in the “Timer” menu (p. 29).

•To cancel, set to “Off” or turn off the TV.

•To display the remaining time Information banner (p. 14)

•When the remaining time is within 3 minutes, the remaining time will be displayed on screen.

Watching content from external devices

With the connected equipment turned On

Display the Input select menu

Select the input mode

Input select

1	ANT/Cable In	Not used
2	HDMI 1	GAME

3HDMI 2

4Comp./Video

(example)

or

select

enter Input label

You can also press the corresponding NUMBER button or press INPUT repeatedly to cycle through the available inputs. If you are unsure which input to select, wait 2 seconds between each selection.

●For your convenience, your can edit the inputs with labels that are easy to remember.

●During the selection, if no action is taken for several seconds, the “Input select” menu disappears.

		Terminal	Set ANT/Cable in (p. 27)
HDMI 1
GAME		Label	Enable Inputs
	(example)		Edit labels
			Input labels
			(Press MENU -> Setup -> Input labels)

Operate the connected equipment directly or use the remote control supplied with the equipment

Note

●For details, see the manual for the connected equipment.

16