Panasonic TC-P50U50 First Time Setup, Turn the TV on with the Power button, Identifying Controls

First Time Setup

The first time setup screen is displayed only when the TV is turned on for the first time, after the power cord is inserted into a wall outlet and the “Auto power on” is set to “No”.

(Press MENU -->Setup -->Advanced setup -->Auto power on)

Turn the TV on with the POWER button

(TV)	(Remote)
or	or

Setup the following items

●Select your language

●Select your viewing mode (Be sure to select “Home Use”)

If you select “Store Demonstration” by mistake, confirmation screen will be displayed.

To display the “Set viewing mode” screen again and select “Home Use”, do one of the following:

• Press and hold down the side POWER button for at least five seconds.

• Unplug power cord for 30 seconds and plug in again.

●ANT/Cable setup

Select and set the settings according to your ANT/Cable environment.

Select “Yes” on the confirmation screen, to start the scanning process.

After scanning is finished completely, press OK to continue.

●Label the inputs for easy identification

To name each input, follow the instructions on screen.

When done, select NEXT and press OK to go to the next step.

(Input select: Refer to Watching content from external devices (p. 16))

●Adjust the Clock

Select the clock mode and set other settings.

Complete First time setup

Completion screen is displayed.

You can repeat the First time setup

•Press MENU -->Setup -->First time setup

To watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR, gaming device, etc.), press the INPUT button and select the appropriate input.

Getting started First Time Setup

Identifying Controls

13