●Do not damage the power cord. (A damaged cord may cause fire or electrical shock.)
•Do not move the TV with the cord plugged in the socket outlet.
•Do not place a heavy object on the cord or place the cord near a
•Do not twist the cord, bend it excessively, or stretch it.
•Do not pull on the cord. Hold onto the power plug body when disconnecting cord.
•Do not use a damaged power plug or socket outlet.
●If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma TV, unplug the power supply cord immediately.
Continued use of the TV under these conditions might cause a fire or permanent damage to the TV. Have the TV evaluated by an Authorized Service Center. Servicing of the TV by unauthorized personnel is strongly discouraged due to its high voltage.
●If water or an object gets inside the Plasma TV, if the Plasma TV is dropped, or if the enclosure becomes damaged, unplug the power supply cord immediately.
A
CAUTION
●Do not cover the ventilation holes.
Doing so may cause the Plasma TV to overheat, which can cause a fire or damage to the Plasma TV.
●Leave a space of 3 15/16” (10 cm) or more at the top, left and right, and 2 3/4” (7 cm) or more at the rear.
●When using the pedestal, keep the space between the bottom of the TV and the pedestal or stand surface clear from objects that may obstruct ventilation.
■When Moving the Plasma TV
● Be sure to disconnect all cables before moving the Plasma TV.
Moving the TV with its cables attached might damage the cables which, in turn, can cause fire or electric shock.
● To prevent an electric shock, disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.
● Transport only in upright position.
Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry.
● Using a dry cloth, clean any dust from the power supply cord and plug regularly.
This Plasma TV radiates infrared rays; therefore, it may affect other infrared communication equipment. Install your infrared sensor in a place away from direct or reflected light from your Plasma TV.
The TV will still consume some power as long as the power supply cord is connected to the wall outlet.
●Display panel is made of glass. Do not apply strong force or impact to the display panel. This may cause damage resulting in injury.
●The TV is heavy. TV should be handled by 2 or more people. Support as shown below to avoid injury by the TV from tipping or falling.
6