Panasonic TH-P42A20P Channel List Edit Skip unwanted channels, Manual Tuning Set channel manually

Tuning and Editing Channels

Channel List Edit Skip unwanted channels

Select a channel and reveal / hide

Channel List Editor	reveal / hide
1	: reveal
2	: hide (skip)
3	select
4
5	● To reveal all channels	Y
6
7

Auto Tuning Set all TV channels automatically

You can hide unwanted channels. The hidden channels cannot be displayed except in this function.

Use this function to skip unwanted channels.

Start Auto Tuning	Settings are made automatically
Auto Tuning	Auto Tuning			Automatically retune all
	Scan	1	120	channels received in the
	2		CH3

All tuning data will be erased		EXIT	area.
Start Auto Tuning	EXIT

RETURN

●All the previous tuning settings are erased.

●When the operation is completed, the channel at channel position “1” will be displayed.

●Search begins in the order from the lower channels to the higher channels. Channels received during this process are added to the list (see above).

●If tuning has not been done completely “Manual Tuning” (see below)

For Auto Tuning, using the buttons on the side panel of the TV (p. 11)

Press repeatedly until “Auto Tuning” appears F

Access “Auto Tuning” TV

Start “Auto Tuning” TV

●To return to TV F

Manual Tuning Set channel manually

	Manual Tuning						Fine Tuning
							● Use to make small adjustments to the
	1				CH57
	Fine Tuning						tuning of an individual channel (affected by
	Manual Tuning	1				120	weather conditions, etc.)
	Sound System		5.5MHz				Manual Tuning
	Colour System
			Auto
							Set channel manually after Auto Tuning.
							● Set Sound System and Colour System,
							and then perform this function. Set Colour
							System “Auto” normally.
							● If a VCR is connected only with the RF
Select a channel position							cable, select channel position “0”.
				Select a channel				Search and store

search store

28